rfc9595.original   rfc9595.txt 
Internet Engineering Task Force M. V. Veillette, Ed. Internet Engineering Task Force (IETF) M. V. Veillette, Ed.
Internet-Draft Trilliant Networks Inc. Request for Comments: 9595 Trilliant Networks Inc.
Intended status: Standards Track A. Pelov, Ed. Category: Standards Track A. Pelov, Ed.
Expires: 24 June 2024 IMT Atlantique ISSN: 2070-1721 IMT Atlantique
I. Petrov, Ed. I. Petrov, Ed.
Google Switzerland GmbH Google Switzerland GmbH
C. Bormann C. Bormann
Universität Bremen TZI Universität Bremen TZI
M. Richardson M. Richardson
Sandelman Software Works Sandelman Software Works
22 December 2023 June 2024
YANG Schema Item iDentifier (YANG SID) YANG Schema Item iDentifier (YANG SID)
draft-ietf-core-sid-24
Abstract Abstract
YANG Schema Item iDentifiers (YANG SID) are globally unique 63-bit YANG Schema Item iDentifiers (YANG SIDs) are globally unique 63-bit
unsigned integers used to identify YANG items, as a more compact unsigned integers used to identify YANG items, as a more compact
method to identify YANG items that can be used for efficiency and in method to identify YANG items that can be used for efficiency and in
constrained environments (RFC 7228). This document defines the constrained environments (RFC 7228). This document defines the
semantics, the registration, and assignment processes of YANG SIDs semantics, registration processes, and assignment processes for YANG
for IETF managed YANG modules. To enable the implementation of these SIDs for IETF-managed YANG modules. To enable the implementation of
processes, this document also defines a file format used to persist these processes, this document also defines a file format used to
and publish assigned YANG SIDs. persist and publish assigned YANG SIDs.
// The present version (–24) is intended to address the remaining
// IESG comments.
About This Document
This note is to be removed before publishing as an RFC.
Status information for this document may be found at
https://datatracker.ietf.org/doc/draft-ietf-core-sid/.
Discussion of this document takes place on the Constrained RESTful
Environments Working Group mailing list (mailto:core@ietf.org), which
is archived at https://mailarchive.ietf.org/arch/browse/core/.
Subscribe at https://www.ietf.org/mailman/listinfo/core/.
Source for this draft and an issue tracker can be found at
https://github.com/core-wg/yang-cbor.
Status of This Memo Status of This Memo
This Internet-Draft is submitted in full conformance with the This is an Internet Standards Track document.
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months This document is a product of the Internet Engineering Task Force
and may be updated, replaced, or obsoleted by other documents at any (IETF). It represents the consensus of the IETF community. It has
time. It is inappropriate to use Internet-Drafts as reference received public review and has been approved for publication by the
material or to cite them other than as "work in progress." Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
This Internet-Draft will expire on 24 June 2024. Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc9595.
Copyright Notice Copyright Notice
Copyright (c) 2023 IETF Trust and the persons identified as the Copyright (c) 2024 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/ Provisions Relating to IETF Documents
license-info) in effect on the date of publication of this document. (https://trustee.ietf.org/license-info) in effect on the date of
Please review these documents carefully, as they describe your rights publication of this document. Please review these documents
and restrictions with respect to this document. Code Components carefully, as they describe your rights and restrictions with respect
extracted from this document must include Revised BSD License text as to this document. Code Components extracted from this document must
described in Section 4.e of the Trust Legal Provisions and are include Revised BSD License text as described in Section 4.e of the
provided without warranty as described in the Revised BSD License. Trust Legal Provisions and are provided without warranty as described
in the Revised BSD License.
Table of Contents Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 1. Introduction
1.1. Terminology and Notation . . . . . . . . . . . . . . . . 5 1.1. Terminology and Notation
2. Objectives . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. Objectives
2.1. Technical Objectives . . . . . . . . . . . . . . . . . . 7 2.1. Technical Objectives
2.2. Module evolution, versioning . . . . . . . . . . . . . . 7 2.2. Module Evolution and Versioning
2.3. Solution Components and Derived Objectives . . . . . . . 8 2.3. Solution Components and Derived Objectives
2.4. Parties and Roles . . . . . . . . . . . . . . . . . . . . 8 2.4. Parties and Roles
3. ".sid" file lifecycle . . . . . . . . . . . . . . . . . . . . 11 3. ".sid" File Lifecycle
4. ".sid" file format . . . . . . . . . . . . . . . . . . . . . 12 4. ".sid" File Format
5. Security Considerations . . . . . . . . . . . . . . . . . . . 20 5. Security Considerations
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 21 6. IANA Considerations
6.1. YANG Namespace Registration . . . . . . . . . . . . . . . 21 6.1. YANG Namespace Registration
6.2. Register ".sid" File Format Module . . . . . . . . . . . 21 6.2. ".sid" File Format Module Registration
6.3. Create new IANA Registry: "YANG SID Mega-Range" 6.3. New IANA Registry: YANG SID Mega-Range
registry . . . . . . . . . . . . . . . . . . . . . . . . 21 6.3.1. Structure
6.3.2. Allocation Policy
6.3.1. Structure . . . . . . . . . . . . . . . . . . . . . . 22 6.3.2.1. First Allocation
6.3.2. Allocation policy . . . . . . . . . . . . . . . . . . 22 6.3.2.2. Consecutive Allocations
6.3.2.1. First allocation . . . . . . . . . . . . . . . . 23 6.3.3. Initial Contents of the Registry
6.3.2.2. Consecutive allocations . . . . . . . . . . . . . 23 6.4. New IANA Registry: IETF YANG SID Range
6.3.3. Initial contents of the Registry . . . . . . . . . . 23 6.4.1. Structure
6.4. Create a new IANA Registry: IETF YANG SID Range Registry 6.4.2. Allocation Policy
(managed by IANA) . . . . . . . . . . . . . . . . . . . . 23 6.4.3. Publication of the ".sid" File
6.4.1. Structure . . . . . . . . . . . . . . . . . . . . . . 24 6.4.4. Initial Contents of the Registry
6.4.2. Allocation policy . . . . . . . . . . . . . . . . . . 24 6.5. New IANA Registry: IETF YANG SID
6.4.3. Publication of the ".sid" file . . . . . . . . . . . 25 6.5.1. Structure
6.4.4. Initial contents of the registry . . . . . . . . . . 26 6.5.2. Allocation Policy
6.5. Create new IANA Registry: "IETF YANG SID Registry" . . . 28
6.5.1. Structure . . . . . . . . . . . . . . . . . . . . . . 28
6.5.2. Allocation policy . . . . . . . . . . . . . . . . . . 28
6.5.3. Recursive Allocation of YANG SID Range at Document 6.5.3. Recursive Allocation of YANG SID Range at Document
Adoption . . . . . . . . . . . . . . . . . . . . . . 29 Adoption
6.5.4. Initial contents of the registry . . . . . . . . . . 30 6.5.4. Initial Contents of the Registry
6.6. Register Media Type and Content-Format . . . . . . . . . 30 6.6. Media Type and Content-Format Registration
6.6.1. Media Type application/yang-sid+json . . . . . . . . 30 6.6.1. Media Type application/yang-sid+json
6.6.2. CoAP Content-Format . . . . . . . . . . . . . . . . . 31 6.6.2. CoAP Content-Format
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 32 7. References
7.1. Normative References . . . . . . . . . . . . . . . . . . 32 7.1. Normative References
7.2. Informative References . . . . . . . . . . . . . . . . . 33 7.2. Informative References
Appendix A. ".sid" file example . . . . . . . . . . . . . . . . 35 Appendix A. ".sid" File Example
Appendix B. SID auto generation . . . . . . . . . . . . . . . . 44 Appendix B. SID Autogeneration
Appendix C. ".sid" file lifecycle . . . . . . . . . . . . . . . 46 Appendix C. ".sid" File Lifecycle
C.1. ".sid" File Creation . . . . . . . . . . . . . . . . . . 46 C.1. ".sid" File Creation
C.2. ".sid" File Update . . . . . . . . . . . . . . . . . . . 47 C.2. ".sid" File Update
Appendix D. Keeping a SID File in a YANG Instance Data file . . 48 Appendix D. Keeping a SID File in a YANG Instance Data File
Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 49 Acknowledgments
Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Contributors
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 49 Authors' Addresses
1. Introduction 1. Introduction
Some of the items defined in YANG [RFC7950] require the use of a Some of the items defined in YANG [RFC7950] require the use of a
unique identifier. In both Network Configuration Protocol (NETCONF) unique identifier. In both the Network Configuration Protocol
[RFC6241] and RESTCONF [RFC8040], these identifiers are implemented (NETCONF) [RFC6241] and RESTCONF [RFC8040], these identifiers are
using names. To allow the implementation of data models defined in implemented using names. To allow the implementation of data models
YANG in constrained devices [RFC7228] and constrained networks, a defined in YANG in constrained devices [RFC7228] and constrained
more compact method to identify YANG items is required. This compact networks, a more compact method to identify YANG items is required.
identifier, called YANG Schema Item iDentifier or YANG SID (or simply This compact identifier, called the YANG Schema Item iDentifier or
SID in this document and when the context is clear), is encoded using YANG SID (or simply SID in this document and when the context is
a 63-bit unsigned integer. The limitation to 63-bit unsigned clear), is encoded using a 63-bit unsigned integer. The limitation
integers allows SIDs to be manipulated more easily on platforms that to 63-bit unsigned integers allows SIDs to be manipulated more easily
might otherwise lack 64-bit unsigned arithmetic. The loss of a on platforms that might otherwise lack 64-bit unsigned arithmetic.
single bit of range is not significant given the size of the The loss of a single bit of range is not significant, given the size
remaining space. of the remaining space.
The following items are identified using SIDs: The following items are identified using SIDs:
* identities * identities
* data nodes (Note: including those nodes defined by the 'rc:yang- * data nodes (note: including those nodes defined by the 'rc:yang-
data' [RFC8040] and 'sx:structure' [RFC8791] extensions.) data' extension [RFC8040] and the 'sx:structure' extension
[RFC8791])
* remote procedure calls (RPCs) and associated input(s) and * remote procedure calls (RPCs) and associated input(s) and
output(s) output(s)
* actions and associated input(s) and output(s) * actions and associated input(s) and output(s)
* notifications and associated information * notifications and associated information
* YANG modules and features * YANG modules and features
It is possible that some protocols use only a subset of the assigned It is possible that some protocols will use only a subset of the
SIDs, for example, for protocols equivalent to NETCONF [RFC6241] like assigned SIDs; for example, for protocols equivalent to NETCONF
[I-D.ietf-core-comi] the transportation of YANG module SIDs might be [RFC6241] like [CORE-COMI], the transport of YANG module SIDs might
unnecessary. Other protocols might need to be able to transport this be unnecessary. Other protocols might need to be able to transport
information, for example protocols related to discovery such as this information -- for example, protocols related to discovery such
Constrained YANG Module Library [I-D.ietf-core-yang-library]. as the Constrained YANG Module Library [YANG-LIBRARY].
SIDs are globally unique integers. A registration system is used in SIDs are globally unique integers. A registration system is used in
order to guarantee their uniqueness. SIDs are registered in blocks order to guarantee their uniqueness. SIDs are registered in blocks
called "SID ranges". Once considered "stable", SIDs are assigned called "SID ranges". Once they are considered "stable", SIDs are
permanently. Items introduced by a new revision of a YANG module are assigned permanently. Items introduced by a new revision of a YANG
added to the list of SIDs already assigned. This is discussed in module are added to the list of SIDs already assigned. This is
more detail in Section 2. discussed in more detail in Section 2.
Assignment of SIDs to YANG items is usually automated as discussed in The assignment of SIDs to YANG items is usually automated as
Appendix B, which also discusses some cases where manual discussed in Appendix B, which also discusses some cases where manual
interventions may be appropriate. interventions may be appropriate.
Section 3 provides more details about the registration process of Section 3 provides more details about the registration processes for
YANG modules and associated SIDs. To enable the implementation of YANG modules and associated SIDs. To enable the implementation of
this registry, Section 4 defines a standard file format used to store these processes, Section 4 defines a standard file format used to
and publish SIDs. store and publish SIDs.
IETF managed YANG modules that need to allocate SIDs use the IANA IETF-managed YANG modules that need to allocate SIDs will use the
mechanism specified in this document. YANG modules created by other IANA mechanism specified in this document. YANG modules created by
parties allocate SID ranges using the IANA allocation mechanisms via other parties allocate SID ranges using the IANA allocation
Mega-Ranges (see Section 6.3); within the Mega-Range allocation, mechanisms via Mega-Ranges (see Section 6.3); within the Mega-Range
those other parties are free to make up their own mechanism. allocation, those other parties are free to make up their own
mechanism.
Among other uses, YANG SIDs are particularly useful to obtain a Among other uses, YANG SIDs are particularly useful for obtaining a
compact encoding for YANG-CBOR [RFC9254]. At the time of writing, a compact encoding for YANG-CBOR [RFC9254]. At the time of writing, a
tool for automated ".sid" file generation is available as part of the tool for automated ".sid" file generation is available as part of the
open-source project PYANG [PYANG]. open-source project PYANG [PYANG].
1.1. Terminology and Notation 1.1. Terminology and Notation
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in "OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
skipping to change at page 5, line 38 skipping to change at line 200
* RPC * RPC
* schema node * schema node
* schema tree * schema tree
* submodule * submodule
This specification also makes use of the following terminology: This specification also makes use of the following terminology:
* item: A schema node, an identity, a module, or a feature defined item: A schema node, an identity, a module, or a feature defined
using the YANG modeling language. using the YANG modeling language.
* YANG Schema Item iDentifier (YANG SID or simply SID): Unsigned YANG Schema Item iDentifier (YANG SID or simply SID): Unsigned
integer used to identify different YANG items (cf. Section 3.2 of integer used to identify different YANG items (cf. Section 3.2 of
[RFC9254]). [RFC9254]).
* YANG Name: Text string used to identify different YANG items (cf. YANG name: Text string used to identify different YANG items
Section 3.3 of [RFC9254]). (cf. Section 3.3 of [RFC9254]).
2. Objectives 2. Objectives
The overriding objective of the SID assignment and registration The overriding objective of the SID assignment and registration
system is to ensure global interoperability of protocols that employ system is to ensure global interoperability of protocols that employ
SIDs in order to communicate about data modeled in YANG. This SIDs in order to communicate about data modeled in YANG. This
objective poses certain requirements on the stability of SIDs while objective poses certain requirements on the stability of SIDs while
at the same time not hindering active evolution of the YANG modules at the same time not hindering active evolution of the YANG modules
the SIDs are intended to support. the SIDs are intended to support.
Additional objectives include: Additional objectives include:
* enabling the developer of a YANG module to also be the originating * enabling the developer of a YANG module to also be the originating
entity for the SIDs pertaining to that module. entity for the SIDs pertaining to that module.
* making it easy for YANG developers to obtain SIDs. * making it easy for YANG developers to obtain SIDs.
* enabling other developers to define SIDs for a module where the * enabling other developers to define SIDs for a module where the
developer of the module is not interested in assigning the SIDs. developer of the module is not interested in assigning the SIDs.
* keeping an assignment regime that keeps short (2..4 byte) SIDs * keeping an assignment regime that keeps short SIDs (2..4 bytes)
readily available for the applications that would benefit from readily available for the applications that would benefit from
them while at the same time employing the vast 63-bit SID space to them while at the same time employing the vast 63-bit SID space to
facilitate permissionless actions. facilitate permissionless actions.
* enabling multiple entities to provide services that support the * enabling multiple entities to provide services that support the
assignment of SIDs. assignment of SIDs.
* maintaining some locality in the assignment of SIDs so the * maintaining some locality in the assignment of SIDs so the
efficiencies of the SID delta mechanism can be fully employed. efficiencies of the SID delta mechanism can be fully employed.
skipping to change at page 6, line 47 skipping to change at line 252
communication process. communication process.
While IANA ultimately maintains the registries that govern SIDs for While IANA ultimately maintains the registries that govern SIDs for
IETF-defined modules, various support tools (such as, at the time of IETF-defined modules, various support tools (such as, at the time of
writing, the YANG Catalog [yangcatalog]) need to provide the support writing, the YANG Catalog [yangcatalog]) need to provide the support
to enable SID assignment and use for modules still in IETF to enable SID assignment and use for modules still in IETF
development. Developers of open-source or proprietary YANG modules development. Developers of open-source or proprietary YANG modules
also need to be able to serve as such entities autonomously, possibly also need to be able to serve as such entities autonomously, possibly
forming alliances independent of the IETF, while still fitting in the forming alliances independent of the IETF, while still fitting in the
overall SID number space managed by IANA. Obviously, this process overall SID number space managed by IANA. Obviously, this process
has a number of parallels to the management of IP addresses, but also has a number of parallels to the management of IP addresses but is
is very different. also very different.
2.1. Technical Objectives 2.1. Technical Objectives
As discussed in the introduction, SIDs are intended as globally As discussed in the Introduction, SIDs are intended as globally
unique (unsigned) integers. unique (unsigned) integers.
Specifically, this means that: Specifically, this means that:
*Objective 1* (MUST): any 63-bit unsigned integer is either *Objective 1* (MUST): Any 63-bit unsigned integer either (1) is
unassigned as a SID or immutably maps to EXACTLY one YANG name. unassigned as a SID or (2) immutably maps to EXACTLY one YANG
Only the transition from unassigned to that immutable mapping is name. Only the transition from unassigned to that immutable
defined. mapping is defined.
This enables a recipient of a data structure employing SIDs to This enables a recipient of a data structure employing SIDs to
translate them into the globally meaningful YANG names that the translate them into the globally meaningful YANG names that the
existing encodings of YANG data such as YANG-XML [RFC7950] and YANG- existing encodings of YANG data such as YANG-XML [RFC7950] and YANG-
JSON [RFC7951] employ today. JSON [RFC7951] employ today.
The term YANG name is not defined outside this document, and YANG has The term "YANG name" is not defined outside this document, and YANG
a complex system of names and entities that can have those names. has a complex system of names and entities that can have those names.
Instead of defining the term technically, this set of objectives uses Instead of defining the term technically, this set of objectives uses
it in such a way that the overall objectives of YANG-SID can be it in such a way that the overall objectives of YANG SID can be
achieved. achieved.
A desirable objective is that: A desirable objective is that:
*Objective 2* (SHOULD): any YANG name in active use has one SID *Objective 2* (SHOULD): Any YANG name in active use has one SID
assigned. assigned.
This means that: This means that:
1. There should not be YANG names without SIDs assigned 1. There should not be YANG names without SIDs assigned.
2. YANG names should not have multiple SIDs assigned 2. YANG names should not have multiple SIDs assigned.
These objectives are unattainable in full, because YANG names are not These objectives are unattainable in full, because YANG names are not
necessarily born with a SID assignment, and because entirely necessarily born with a SID assignment and because entirely
autonomous entities might decide to assign SIDs for the same YANG autonomous entities might decide to assign SIDs for the same YANG
name without communicating ("like ships in the night"). Note that as name without communicating ("like ships in the night"). Note that as
long as this autonomy is maintained, any single observer will have long as this autonomy is maintained, any single observer will have
the impression that Objective 2 is attained. Only when entities that the impression that Objective 2 is attained. Only when entities that
have acted autonomously start communicating, a deviation is observed. have acted autonomously start communicating will a deviation be
observed.
2.2. Module evolution, versioning 2.2. Module Evolution and Versioning
YANG modules evolve (see Section 11 of [RFC7950], Section 4.27 of YANG modules evolve (see Section 11 of [RFC7950] and Section 4.27 of
[RFC8407]). The technical objectives listed above are states in [RFC8407]). The technical objectives listed above are states in
terms that are independent of this evolution. terms that are independent of this evolution.
However, some modules are still in a very fluid state, and the However, some modules are still in a very fluid state, and the
assignment of permanent SIDs to the YANG names created in them is assignment of permanent SIDs to the YANG names created in them is
less desirable. This is not only true for new modules, but also for less desirable. This is true not only for new modules but also for
emerging new revisions of existing stable modules. emerging new revisions of existing stable modules.
*Objective 3* (MUST): the SID management system is independent of *Objective 3* (MUST): The SID management system is independent of
any module versioning. any module versioning.
2.3. Solution Components and Derived Objectives 2.3. Solution Components and Derived Objectives
A registration system is used in order to guarantee the uniqueness of A registration system is used in order to guarantee the uniqueness of
SIDs. To be able to provide some autonomy in allocation (and avoid SIDs. To be able to provide some autonomy in allocation (and avoid
information disclosure where it is not desirable), SIDs are information disclosure where it is not desirable), SIDs are
registered in blocks called "SID ranges". registered in blocks called "SID ranges".
SIDs are assigned permanently. SIDs are assigned permanently.
skipping to change at page 8, line 39 skipping to change at line 338
module controller: module controller:
The owner of the YANG module, i.e., the controller about its The owner of the YANG module, i.e., the controller about its
evolution. evolution.
registration entity: registration entity:
The controller of the module namespace, specifically also of the The controller of the module namespace, specifically also of the
prefixes that are in common use. (This is not a required party.) prefixes that are in common use. (This is not a required party.)
module repository: module repository:
An entity that supplies modules to module users. This can be An entity that supplies modules to module users. This can be an
"official" (e.g., IANA for IETF modules) or unofficial (e.g., the "official" entity (e.g., IANA for IETF modules) or an "unofficial"
YANG Catalog [yangcatalog]). Not all repositories are in a entity (e.g., the YANG Catalog [yangcatalog]). Not all
position to act as a registry, i.e., as a permanent record for the repositories are in a position to act as a registry, i.e., as a
information they supply; these repositories need to recur to permanent record for the information they supply; these
module owners as a stable source. repositories need to recur to module owners as a stable source.
module user: module user:
An entity that uses a module, after obtaining it from the module An entity that uses a module, after obtaining it from the module
controller or a module repository. controller or a module repository.
This set of parties needs to evolve to take on the additional roles This set of parties needs to evolve to take on the additional roles
that the SID assignment process requires: that the SID assignment process requires:
SID assigner: SID assigner:
An entity that assigns SIDs for a module. Objective 2 aims at An entity that assigns SIDs for a module. Objective 2 aims at
having only one SID assigner for each module. SID assigners having only one SID assigner for each module. SID assigners
preferably stay the same over a module development process; preferably stay the same over a module development process;
however this specification provides SID files to ensure an however, this specification provides SID files to ensure an
organized handover. organized handover.
SID range registries: SID range registry:
The entities that supply a SID assigner with SID ranges that they An entity that supplies a SID assigner with SID ranges that it can
can use in assigning SIDs for a module. (In this specification, use in assigning SIDs for a module. (In this specification, there
there is a structure with mega-ranges and individual SID ranges; is a structure with mega-ranges and individual SID ranges; this is
this is not relevant here.) not relevant here.)
SID repository: SID repository:
An entity that supplies SID assignments to SID users, usually in An entity that supplies SID assignments to SID users, usually in
the form of a SID file. the form of a SID file.
SID users: SID user:
The module user that uses the SIDs provided by a SID assigner for The module user that uses the SIDs provided by a SID assigner for
a YANG module. SID users need to find SID assigners (or at least a YANG module. SID users need to find SID assigners (or at least
their SID assignments). their SID assignments).
During the introduction of SIDs, the distribution of the SID roles to During the introduction of SIDs, the distribution of the SID roles to
the existing parties for a YANG module will evolve. the existing parties for a YANG module will evolve.
The desirable end state of this evolution is shown in Table 1. The desirable end state of this evolution is shown in Table 1.
+====================+======================================+ +====================+======================================+
skipping to change at page 9, line 46 skipping to change at line 393
+--------------------+--------------------------------------+ +--------------------+--------------------------------------+
| SID range registry | (as discussed in this specification) | | SID range registry | (as discussed in this specification) |
+--------------------+--------------------------------------+ +--------------------+--------------------------------------+
| SID repository | module repository | | SID repository | module repository |
+--------------------+--------------------------------------+ +--------------------+--------------------------------------+
| SID user | module user (naturally) | | SID user | module user (naturally) |
+--------------------+--------------------------------------+ +--------------------+--------------------------------------+
Table 1: Roles and Parties: Desired End State Table 1: Roles and Parties: Desired End State
This grouping of roles and parties puts the module developer into a This grouping of roles and parties puts the module developer in a
position where it can achieve the objectives laid out in this section position where it can achieve the objectives laid out in this section
(a "type-1", "SID-guiding" module controller). (While a third party (a "type-1", "SID-guiding" module controller). (While a third party
might theoretically assign additional SIDs and conflict with might theoretically assign additional SIDs and conflict with
objective 2, there is very little reason to do so if SID files are Objective 2, there is very little reason to do so if SID files are
always provided by the module developer with the module.) always provided by the module developer with the module.)
The rest of this section is concerned with the transition to this end The rest of this section is concerned with the transition to this end
state. state.
For existing modules, there is no SID file. The entity that stands For existing modules, there is no SID file. The entity that stands
in as the SID assigner is not specified. This situation has the in as the SID assigner is not specified. This situation has the
highest potential of a conflict with objective 2. highest potential for conflict with Objective 2.
Similarly, for new module development, the module owner may not have Similarly, for new module development, the module owner may not have
heard about SIDs or not be interested in assigning them (e.g., heard about SIDs or may not be interested in assigning them (e.g.,
because of lack of software or procedures within their organization). because of lack of software or procedures within their organization).
For these two cases (which we will call type-3, "SID-oblivious" For these two cases (which we will call "type-3", "SID-oblivious"
module controller), module repositories can act as a mediator, giving module controllers), module repositories can act as a mediator,
SID users access to a SID assigner that is carefully chosen to be a giving SID users access to a SID assigner that is carefully chosen to
likely choice by other module repositories as well, maximizing the be a likely choice by other module repositories as well, maximizing
likelihood of achieving objective 2. the likelihood of achieving Objective 2.
If the module controller has heard about SIDs, but is not assigning If a module controller has heard about SIDs but is not assigning them
them yet, it can designate a SID assigner instead. This can lead to yet, it can designate a SID assigner instead. This can lead to a
a stable, unique set of SID assignments being provided indirectly by stable, unique set of SID assignments being provided indirectly by a
a (type-2, "SID-aware") module developer. Entities offering ("type-2", "SID-aware") module developer. Entities offering
designated SID assigner services could make these available in an designated SID assigner services could make these available in an
easy-to-use way, e.g., via a Web interface. easy-to-use way, e.g., via a web interface.
The entity acting as a SID assigner minimally needs to record the SID The entity acting as a SID assigner minimally needs to record the SID
range it uses for the SID assignment. If the SID range registry can range it uses for the SID assignment. If the SID range registry can
record the module name and revision, and the assignment processes record the module name and revision and if the assignment processes
(including the software used) are stable, the SID assigner can (including the software used) are stable, the SID assigner can
theoretically reconstruct its assignments, but this is an invitation theoretically reconstruct its assignments, but this could invite
for implementation bugs. implementation bugs.
SID assigners attending to a module in development (not yet stable) SID assigners attending to a module in development (not yet stable)
need to decide whether SIDs for a new revision are re-assigned from need to decide whether SIDs for a new revision are reassigned from
scratch ("clean-slate") or use existing assignments from a previous scratch ("clean slate") or use existing assignments from a previous
revision as a base, only assigning new SIDs for new names. Once a revision as a base, only assigning new SIDs for new names. Once a
module is declared stable, its SID assignments SHOULD be declared module is declared stable, its SID assignments SHOULD be declared
stable as well (the exception being that, for existing YANG modules, stable as well (except that, for existing YANG modules, some review
some review may be needed before this is done). may be needed before this is done).
This specification does not further discuss how mediating entities This specification does not further discuss how mediating entities
such as designated SID assigners or SID repositories could operate; such as designated SID assigners or SID repositories could operate;
instead, it supplies objectives for their operation. instead, it supplies objectives for their operation.
3. ".sid" file lifecycle 3. ".sid" File Lifecycle
YANG is a language designed to model data accessed using one of the YANG is a language designed to model data accessed using one of the
compatible protocols (e.g. NETCONF [RFC6241], RESTCONF [RFC8040] and compatible protocols (e.g., NETCONF [RFC6241], RESTCONF [RFC8040],
CORECONF [I-D.ietf-core-comi]). A YANG module defines hierarchies of and the CoAP Management Interface (CORECONF) [CORE-COMI]). A YANG
data, including configuration, state data, RPCs, actions and module defines hierarchies of data, including configuration, state
notifications. data, RPCs, actions, and notifications.
Many YANG modules are not created in the context of constrained Many YANG modules are not created in the context of constrained
applications. YANG modules can be implemented using NETCONF applications. YANG modules can be implemented using NETCONF
[RFC6241] or RESTCONF [RFC8040] without the need to assign SIDs. [RFC6241] or RESTCONF [RFC8040] without the need to assign SIDs.
As needed, authors of YANG modules can assign SIDs to their YANG As needed, authors of YANG modules can assign SIDs to their YANG
modules. In order to do that, they should first obtain a SID range modules. In order to do that, they should first obtain a SID range
from a registry and use that range to assign or generate SIDs to from a registry and use that range to assign or generate SIDs to
items of their YANG module. The assignments can then be stored in a items in their YANG module. The assignments can then be stored in a
".sid" file. For example on how this could be achieved, please refer ".sid" file. For an example of how this could be achieved, please
to Appendix C. refer to Appendix C.
Items introduced by a new revision of a YANG module are added to the Items introduced by a new revision of a YANG module are added to the
list of SIDs already assigned. When this is done during development list of SIDs already assigned. When this is done during the
of a new protocol document, it may be necessary to make provisional development of a new protocol document, it may be necessary to make
assignments. They may get changed, revised or withdrawn during the provisional assignments. They may get changed, revised, or withdrawn
development of a new standard. These provisional assignments are during the development of a new standard. These provisional
marked with a status of "unstable", so that they can be removed and assignments are marked with a status of "unstable", so that they can
the SID number possibly be reassigned for a different YANG schema be removed and the SID number possibly reassigned for a different
name/path later during development. When the specification is YANG schema name/path later in the development process. When the
advanced to a final document, then the assignment is marked with a specification is advanced to a final document, the assignment is
status of "stable". During a period of development starting from a marked with a status of "stable". During a period of development
published specification, two variants of the SID file should be made starting from a published specification, two variants of the SID file
available by the tooling involved in that development: (1) a should be made available by the tooling involved in that development:
"published" SID file with the existing stable SID assignments only (1) a "published" SID file with the existing stable SID assignments
(which the development effort should keep stable), as well as (2) an only (which the development effort should keep stable), as well as
"unpublished" SID file that also contains the unstable SID (2) an "unpublished" SID file that also contains the unstable SID
assignments. assignments.
Registration of the ".sid" file associated to a YANG module is Registration of the ".sid" file associated with a YANG module is
optional but recommended, in order to promote interoperability optional but recommended, in order to promote interoperability
between devices and to avoid duplicate allocation of SIDs to a single between devices and to avoid duplicate allocation of SIDs to a single
YANG module. Different registries might have different requirements YANG module. Different registries might have different requirements
for the registration and publication of the ".sid" files. For a for the registration and publication of the ".sid" files. For a
diagram of one of the possibilities, please refer to the activity diagram of one possible scenario, please refer to the activity
diagram on Figure 4 in Appendix C. diagram shown in Figure 4 in Appendix C.
Each time a YANG module or one of its imported module(s) or included Each time a YANG module, one or more of its imported modules, or one
submodule(s) is updated, a new ".sid" file MAY be created if the new or more of its included submodules are updated, a new ".sid" file MAY
or updated items will need SIDs. All the SIDs present in the be created if the new or updated items will need SIDs. All the SIDs
previous version of the ".sid" file MUST be present in the new present in the previous version of the ".sid" file MUST be present in
version as well. The creation of this new version of the ".sid" file the new version as well. The creation of this new version of the
SHOULD be performed using an automated tool. ".sid" file SHOULD be performed using an automated tool.
If a new revision requires more SIDs than initially allocated, a new If a new revision requires more SIDs than initially allocated, a new
SID range MUST be added to the 'assignment-range' as defined in SID range MUST be added to the 'assignment-range' item as defined in
Section 4. These extra SIDs are used for subsequent assignments. Section 4. These extra SIDs are used for subsequent assignments.
For an example of this update process, see activity diagram Figure 5 For an example of this update process, see the activity diagram shown
in Appendix C. in Figure 5 in Appendix C.
4. ".sid" file format 4. ".sid" File Format
".sid" files are used to persist and publish SIDs assigned to the ".sid" files are used to persist and publish SIDs assigned to the
different YANG items of a specific YANG module. different YANG items in a specific YANG module.
It has the following structure: It has the following structure:
module: ietf-sid-file module: ietf-sid-file
structure sid-file: structure sid-file:
+-- module-name yang:yang-identifier +-- module-name yang:yang-identifier
+-- module-revision? revision-identifier +-- module-revision? revision-identifier
+-- sid-file-version? sid-file-version-identifier +-- sid-file-version? sid-file-version-identifier
+-- sid-file-status? enumeration +-- sid-file-status? enumeration
skipping to change at page 12, line 46 skipping to change at line 528
| +-- module-revision revision-identifier | +-- module-revision revision-identifier
+-- assignment-range* [entry-point] +-- assignment-range* [entry-point]
| +-- entry-point sid | +-- entry-point sid
| +-- size uint64 | +-- size uint64
+-- item* [namespace identifier] +-- item* [namespace identifier]
+-- status? enumeration +-- status? enumeration
+-- namespace enumeration +-- namespace enumeration
+-- identifier union +-- identifier union
+-- sid sid +-- sid sid
Figure 1: YANG tree for ietf-sid-file Figure 1: YANG Tree for 'ietf-sid-file'
The following YANG module defines the structure of this file,
encoding is performed in JSON [RFC8259] using the rules defined in
[RFC7951]. It references ietf-yang-types defined in [RFC6991] and
ietf-yang-structure-ext defined in [RFC8791].
RFC Ed.: please update the date of the module and Copyright if needed The following YANG module defines the structure of this file.
and remove this note. Encoding is performed in JSON [RFC8259] using the rules defined in
[RFC7951]. This module imports 'ietf-yang-types' [RFC6991] and
'ietf-yang-structure-ext' [RFC8791]. It also references [RFC7950]
and [RFC8407].
<CODE BEGINS> file "ietf-sid-file@2023-10-27.yang" <CODE BEGINS> file "ietf-sid-file@2024-06-17.yang"
module ietf-sid-file { module ietf-sid-file {
yang-version 1.1; yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-sid-file"; namespace "urn:ietf:params:xml:ns:yang:ietf-sid-file";
prefix sid; prefix sid;
import ietf-yang-types { import ietf-yang-types {
prefix yang; prefix yang;
reference "RFC 6991: Common YANG Data Types."; reference "RFC 6991: Common YANG Data Types";
} }
import ietf-yang-structure-ext { import ietf-yang-structure-ext {
prefix sx; prefix sx;
reference "RFC 8791: YANG Data Structure Extensions."; reference "RFC 8791: YANG Data Structure Extensions";
} }
organization organization
"IETF Core Working Group"; "IETF CORE Working Group";
contact contact
"WG Web: <https://datatracker.ietf.org/wg/core/> "WG Web: <https://datatracker.ietf.org/wg/core/>
WG List: <mailto:core@ietf.org> WG List: <mailto:core@ietf.org>
Editor: Michel Veillette Editor: Michel Veillette
<mailto:michel.veillette@trilliant.com> <mailto:michel.veillette@trilliant.com>
Editor: Andy Bierman Editor: Andy Bierman
<mailto:andy@yumaworks.com> <mailto:andy@yumaworks.com>
Editor: Alexander Pelov Editor: Alexander Pelov
<mailto:a@ackl.io> <mailto:a@ackl.io>
Editor: Ivaylo Petrov Editor: Ivaylo Petrov
<mailto:ivaylopetrov@google.com>"; <mailto:ivaylopetrov@google.com>";
description description
"Copyright (c) 2023 IETF Trust and the persons identified as "This module defines the structure of the .sid files.
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Revised BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX Each .sid file contains the mapping between each
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself string identifier defined by a YANG module and a
for full legal notices. corresponding numeric value called a YANG SID.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL
NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED', NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED',
'MAY', and 'OPTIONAL' in this document are to be interpreted as 'MAY', and 'OPTIONAL' in this document are to be interpreted as
described in BCP 14 (RFC 2119) (RFC 8174) when, and only when, described in BCP 14 (RFC 2119) (RFC 8174) when, and only when,
they appear in all capitals, as shown here. they appear in all capitals, as shown here.
This module defines the structure of the .sid files. Copyright (c) 2024 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Each .sid file contains the mapping between each Redistribution and use in source and binary forms, with or
string identifier defined by a YANG module and a without modification, is permitted pursuant to, and subject to
corresponding numeric value called YANG SID."; the license terms contained in, the Revised BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).";
revision 2023-10-27 { revision 2024-06-17 {
description description
"Initial revision."; "Initial revision.";
reference reference "RFC 9595: YANG Schema Item iDentifier (YANG SID)";
"[RFC XXXX] YANG Schema Item iDentifier (YANG SID)";
} }
typedef revision-identifier { typedef revision-identifier {
type string { type string {
pattern '[0-9]{4}-[0-9]{2}-[0-9]{2}'; pattern '[0-9]{4}-[0-9]{2}-[0-9]{2}';
} }
description description
"Represents a date in YYYY-MM-DD format."; "Represents a date in YYYY-MM-DD format.";
} }
skipping to change at page 14, line 47 skipping to change at line 619
type uint32; type uint32;
description description
"Represents the version of a .sid file."; "Represents the version of a .sid file.";
} }
typedef sid { typedef sid {
type uint64 { type uint64 {
range "0..9223372036854775807"; range "0..9223372036854775807";
} }
description description
"YANG Schema Item iDentifier"; "YANG Schema Item iDentifier.";
reference reference "RFC 9595: YANG Schema Item iDentifier (YANG SID)";
"[RFC XXXX] YANG Schema Item iDentifier (YANG SID)";
} }
typedef schema-node-path { typedef schema-node-path {
type string { type string {
pattern pattern
'/[a-zA-Z_][a-zA-Z0-9\-_.]*:[a-zA-Z_][a-zA-Z0-9\-_.]*' + '/[a-zA-Z_][a-zA-Z0-9\-_.]*:[a-zA-Z_][a-zA-Z0-9\-_.]*' +
'(/[a-zA-Z_][a-zA-Z0-9\-_.]*(:[a-zA-Z_][a-zA-Z0-9\-_.]*)?)*'; '(/[a-zA-Z_][a-zA-Z0-9\-_.]*(:[a-zA-Z_][a-zA-Z0-9\-_.]*)?)*';
} }
description description
"A schema-node path is an absolute YANG schema node identifier "A schema-node path is an absolute YANG schema node
as defined by the YANG ABNF rule absolute-schema-nodeid, identifier as defined by the YANG ABNF rule
except that module names are used instead of prefixes. 'absolute-schema-nodeid', except that module names are used
instead of prefixes.
This string additionally follows the following rules: This string additionally follows the following rules:
o The leftmost (top-level) data node name is always in the - The leftmost (top-level) data node name is always in the
namespace-qualified form. namespace-qualified form.
o Any subsequent schema node name is in the - Any subsequent schema node name is in the
namespace-qualified form if the node is defined in a module namespace-qualified form if the node is defined in a
other than its parent node, and the simple form is used module other than its parent node. Otherwise, the
otherwise. No predicates are allowed."; simple form is used. No predicates are allowed.";
reference reference "RFC 7950: The YANG 1.1 Data Modeling Language,
"RFC 7950, The YANG 1.1 Data Modeling Language; Section 6.5: Schema Node Identifier";
Section 6.5: Schema Node Identifier;";
} }
sx:structure sid-file { sx:structure sid-file {
uses sid-file-contents; uses sid-file-contents;
} }
grouping sid-file { grouping sid-file {
description "A grouping that contains a YANG container description
representing the file structure of a .sid files."; "A grouping that contains a YANG container
representing the file structure of a .sid files.";
container sid-file { container sid-file {
description description
"A wrapper container that together with the sx:structure "A wrapper container that together with the 'sx:structure'
extension marks the YANG data structures inside as not being extension marks the YANG data structures inside as not
intended to be implemented as part of a configuration being intended to be implemented as part of a
datastore or as an operational state within the server."; configuration datastore or as an operational state within
the server.";
uses sid-file-contents; uses sid-file-contents;
} }
} }
grouping sid-file-contents { grouping sid-file-contents {
description description
"A grouping that defines the contents of a container that "A grouping that defines the contents of a container that
represents the file structure of a .sid files."; represents the file structure of a .sid files.";
leaf module-name { leaf module-name {
type yang:yang-identifier; type yang:yang-identifier;
mandatory true; mandatory true;
description description
"Name of the YANG module associated with this .sid file."; "Name of the YANG module associated with this .sid file.";
} }
leaf module-revision { leaf module-revision {
type revision-identifier; type revision-identifier;
description description
"Revision of the YANG module associated with this .sid "Revision of the YANG module associated with this .sid
file. file.
This leaf is not present if no revision statement is This leaf is not present if no revision statement is
defined in the YANG module."; defined in the YANG module.";
} }
leaf sid-file-version { leaf sid-file-version {
type sid-file-version-identifier; type sid-file-version-identifier;
default 0; default 0;
description description
"Optional leaf that specifies the version number of the "Optional leaf that specifies the version number of the
.sid file. .sid files and the version sequence are .sid file. .sid files and the version sequence are
specific to a given YANG module revision. This number specific to a given YANG module revision. This number
starts at zero when there is a new YANG module revision and starts at zero when there is a new YANG module revision
increases monotonically. This number can distinguish and increases monotonically. This number can distinguish
updates to the .sid file which are the result of new updates to the .sid file that are the result of new
processing, or the result of reported errata."; processing or reported errata.";
} }
leaf sid-file-status { leaf sid-file-status {
type enumeration { type enumeration {
enum unpublished { enum unpublished {
description description
"This .sid file is unpublished [RFC8407], also called "This .sid file is unpublished (RFC 8407) and is
a work-in-progress or workfile. also called a work in progress or workfile.
This may be when it accompanies an unpublished YANG This may be when it accompanies an unpublished YANG
module, or when only the .sid file itself is module or when only the .sid file itself is
unpublished. unpublished.
The 'item' list MAY contain entries with a status The 'item' list MAY contain entries with a status
value of 'unstable'."; value of 'unstable'.";
reference "RFC 8407: Guidelines for Authors and
Reviewers of Documents Containing
YANG Data Models";
} }
enum published { enum published {
description description
"This .sid file is published, for a published YANG "This .sid file is published, for a published YANG
module. The 'item' list MUST NOT contain entries with module. The 'item' list MUST NOT contain entries
a status value of 'unstable'."; with a status value of 'unstable'.";
} }
} }
default published; default published;
description description
"Optional leaf that specifies the status of the "Optional leaf that specifies the status of the
.sid file."; .sid file.";
} }
leaf description { leaf description {
type string; type string;
description description
"Free-form meta information about the generated file. It "Free-form meta-information about the generated file. It
might include .sid file generation tool and time among might include a .sid file generation tool and time, among
other things."; other things.";
} }
list dependency-revision { list dependency-revision {
key "module-name"; key "module-name";
description description
"Information about the revision used during the .sid file "Information about the revision used during the .sid file
generation of each YANG module that the module in generation of each YANG module that the module in
'module-name' imported."; 'module-name' imported.";
leaf module-name { leaf module-name {
type yang:yang-identifier; type yang:yang-identifier;
description description
"Name of the YANG module, dependency of 'module-name', "Name of the YANG module, dependency of 'module-name',
for which revision information is provided."; for which revision information is provided.";
} }
leaf module-revision { leaf module-revision {
type revision-identifier; type revision-identifier;
mandatory true; mandatory true;
description description
"Revision of the YANG module, dependency of "Revision of the YANG module, dependency of
'module-name', for which revision information is 'module-name', for which revision information is
provided."; provided.";
} }
} }
list assignment-range { list assignment-range {
key "entry-point"; key "entry-point";
description description
"YANG SID range(s) allocated to the YANG module identified "YANG SID range(s) allocated to the YANG module
by 'module-name' and 'module-revision'. identified by 'module-name' and 'module-revision'.
- The YANG SID range first available value is entry-point - The first available value in the YANG SID range is
and the last available value in the range is 'entry-point', and the last available value in the
(entry-point + size - 1). range is ('entry-point' + size - 1).
- The YANG SID ranges specified by all assignment-ranges - The YANG SID ranges specified by all
MUST NOT overlap."; 'assignment-range' entries MUST NOT overlap.";
leaf entry-point { leaf entry-point {
type sid; type sid;
description description
"Lowest YANG SID available for assignment."; "Lowest YANG SID available for assignment.";
} }
leaf size { leaf size {
type uint64; type uint64;
mandatory true; mandatory true;
skipping to change at page 18, line 25 skipping to change at line 793
"Number of YANG SIDs available for assignment."; "Number of YANG SIDs available for assignment.";
} }
} }
list item { list item {
key "namespace identifier"; key "namespace identifier";
unique "sid"; unique "sid";
description description
"Each entry within this list defines the mapping between "Each entry within this list defines the mapping between
a YANG item string identifier and a YANG SID. This list a YANG item string identifier and a YANG SID. This list
MUST include a mapping entry for each YANG item defined by MUST include a mapping entry for each YANG item defined
the YANG module identified by 'module-name' and by the YANG module identified by 'module-name' and
'module-revision'."; 'module-revision'.";
leaf status { leaf status {
type enumeration { type enumeration {
enum stable { enum stable {
value 0; value 0;
description "This SID allocation has been published as description
the stable allocation for the given "This SID allocation has been published as the
namespace and identifier."; stable allocation for the given namespace and
identifier.";
} }
enum unstable { enum unstable {
value 1; value 1;
description "This SID allocation has been done during a description
development process; it is not yet stable."; "This SID allocation has been done during a
development process; it is not yet stable.";
} }
enum obsolete { enum obsolete {
value 2; value 2;
description "This SID allocation is no longer in use. description
It is recorded to avoid reallocation of "This SID allocation is no longer in use. It is
its SID value."; recorded to avoid reallocation of its SID value.";
} }
} }
default stable; default stable;
description description
"The status field contains information about the stability "The status field contains information about the
of the allocation. For each specific SID value, over time stability of the allocation. For each specific SID
it can only transition from unstable to stable, value, over time it can only transition from
and possibly from stable to obsolete."; 'unstable' to 'stable', and possibly from 'stable' to
'obsolete'.";
} }
leaf namespace { leaf namespace {
type enumeration { type enumeration {
enum module { enum module {
value 0; value 0;
description description
"All module and submodule names share the same "All module and submodule names share the same
global module identifier namespace."; global module identifier namespace.";
} }
enum identity { enum identity {
value 1; value 1;
description description
"All identity names defined in a module and its "All identity names defined in a module and its
submodules share the same identity identifier submodules share the same identity identifier
namespace."; namespace.";
} }
enum feature { enum feature {
value 2; value 2;
description description
"All feature names defined in a module and its "All feature names defined in a module and its
submodules share the same feature identifier submodules share the same feature identifier
namespace."; namespace.";
} }
enum data { enum data {
value 3; value 3;
description description
"The namespace for all data nodes, as defined in "The namespace for all data nodes, as defined in
YANG."; YANG.";
} }
} }
description description
"Namespace of the YANG item for this mapping entry."; "Namespace of the YANG item for this mapping entry.";
} }
leaf identifier { leaf identifier {
type union { type union {
type yang:yang-identifier; type yang:yang-identifier;
type schema-node-path; type schema-node-path;
} }
description description
"String identifier of the YANG item for this mapping "String identifier of the YANG item for this mapping
entry. entry.
If the corresponding 'namespace' field is 'module', If the corresponding 'namespace' field is 'module',
'feature', or 'identity', then this field MUST 'feature', or 'identity', then this field MUST
contain a valid YANG identifier string. contain a valid YANG identifier string.
If the corresponding 'namespace' field is 'data', If the corresponding 'namespace' field is 'data',
then this field MUST contain a valid schema-node then this field MUST contain a valid schema-node
path."; path.";
} }
leaf sid { leaf sid {
type sid; type sid;
mandatory true; mandatory true;
description description
"YANG SID assigned to the YANG item for this mapping "YANG SID assigned to the YANG item for this mapping
entry."; entry.";
} }
} }
} }
} }
<CODE ENDS> <CODE ENDS>
Figure 2: YANG module ietf-sid-file Figure 2: YANG Module 'ietf-sid-file'
5. Security Considerations 5. Security Considerations
This document defines a new type of identifier used to encode data This document defines a new type of identifier used to encode data
that are modeled in YANG [RFC7950]. This new identifier maps that are modeled in YANG [RFC7950]. This new identifier maps
semantic concepts to integers, and if the source of this mapping is semantic concepts to integers, and if the source of this mapping is
not trusted, then new security risks might occur if an attacker can not trusted, then new security risks might occur if an attacker can
control the mapping. control the mapping.
At the time of writing, it is expected that the SID files will be At the time of writing, it is expected that the SID files will be
processed by a software developer, within a software development processed by a software developer, within a software development
environment. Developers are advised to only import SID files from environment. Developers are advised to only import SID files from
authoritative sources. IANA is the authoritative source for IETF authoritative sources. IANA is the authoritative source for IETF-
managed YANG modules. managed YANG modules.
Conceptually, SID files could be processed by less-constrained target Conceptually, SID files could be processed by less-constrained target
systems such as network management systems. Such systems need to systems such as network management systems. Such systems need to
take extra care to make sure that they are only processing SID files take extra care to make sure that they are only processing SID files
from authoritative sources, as authoritative as the YANG modules that from authoritative sources that are as authoritative as the YANG
they are using. modules that they are using.
SID files are identified with and can employ _dereferenceable SID files are identified with and can employ _dereferenceable
identifiers_, i.e., identifiers that could lead implementations in identifiers_, i.e., identifiers that could lead implementations in
certain situations to automatically perform a remote access the certain situations to automatically perform remote access, the target
target of which is indicated at least partially by those identifiers. of which is indicated at least partially by those identifiers. This
This can give an attacker information from and/or control over such can give an attacker information from and/or control over such
accesses, which can have security and privacy implications. Please accesses, which can have security and privacy implications. Please
also see Sections 5 and 6 of [I-D.bormann-t2trg-deref-id] for further also see Sections 6 and 7 of [DEREF-ID] for further considerations
considerations that may be applicable. that may be applicable.
6. IANA Considerations 6. IANA Considerations
6.1. YANG Namespace Registration 6.1. YANG Namespace Registration
This document registers the following XML namespace URN in the "IETF This document registers the following XML namespace URN in the "IETF
XML Registry", following the format defined in [RFC3688]: XML Registry", following the format defined in [RFC3688]:
URI: please assign urn:ietf:params:xml:ns:yang:ietf-sid-file URI: urn:ietf:params:xml:ns:yang:ietf-sid-file
Registrant Contact: The IESG.
Registrant Contact: The IESG. XML: N/A; the requested URI is an XML namespace.
Reference: RFC 9595
XML: N/A, the requested URI is an XML namespace.
Reference: RFC XXXX
// RFC Ed.: please replace XXXX with RFC number and remove this note
6.2. Register ".sid" File Format Module 6.2. ".sid" File Format Module Registration
This document registers one YANG module in the "YANG Module Names" This document registers one YANG module in the "YANG Module Names"
registry [RFC6020]: registry [RFC6020]:
* name: ietf-sid-file Name: ietf-sid-file
Namespace: urn:ietf:params:xml:ns:yang:ietf-sid-file
* namespace: urn:ietf:params:xml:ns:yang:ietf-sid-file Prefix: sid
Reference: RFC 9595
* prefix: sid
* reference: RFC XXXX
// RFC Ed.: please replace XXXX with RFC number and remove this note
6.3. Create new IANA Registry: "YANG SID Mega-Range" registry 6.3. New IANA Registry: YANG SID Mega-Range
The name of this registry is "YANG SID Mega-Range". This registry is The name of this registry is "YANG SID Mega-Range". This registry is
used to record the delegation of the management of a block of SIDs to used to record the delegation of the management of a block of SIDs to
third parties (such as SDOs or registrars). third parties (such as Standards Development Organizations (SDOs) or
registrars).
6.3.1. Structure 6.3.1. Structure
Each entry in this registry must include: Each entry in this registry must include:
* The entry point (first SID) of the registered SID block. * The entry point (first SID) of the registered SID block.
* The size of the registered SID block. The size SHOULD be one * The size of the registered SID block. The size SHOULD be one
million (1 000 000) SIDs, it MAY exceptionally be a multiple of million (1 000 000) SIDs; it MAY exceptionally be a multiple of 1
1 000 000. 000 000.
* The policy of SID range allocations: Public, Private or Both. * The policy of SID range allocations: Public, Private, or Both.
* The contact information of the requesting organization including: * The contact information of the requesting organization, including
the following:
- Organization name - Organization name.
- URL - URL.
6.3.2. Allocation policy 6.3.2. Allocation Policy
The IANA policy for future additions to this registry is "Expert The IANA policy for future additions to this registry is "Expert
Review" [RFC8126]. Review" [RFC8126].
An organization requesting to manage a YANG SID Range (and thus have An organization requesting to manage a YANG SID Range (and thus have
an entry in the YANG SID Mega-Range Registry), must ensure the an entry in the "YANG SID Mega-Range" registry) must ensure the
following capacities: following capacities:
* The capacity to manage and operate a YANG SID Range Registry. A * The capacity to manage and operate a registry of YANG SID ranges.
YANG SID Range Registry MUST provide the following information for A registry of YANG SID ranges MUST provide the following
all YANG SID Ranges allocated by the Registry: information for all YANG SID Ranges allocated by the registry:
- Entry Point of allocated YANG SID Range - The entry point of the allocated YANG SID Range.
- Size of allocated YANG SID Range - The size of the allocated YANG SID Range.
- Type: Public or Private - Type: Public or Private.
o Public Ranges MUST include at least a reference to the YANG o Public ranges MUST include at least a reference to the YANG
module and ".sid" files for that YANG SID Range (e.g., module and ".sid" files for that YANG SID Range (e.g.,
compare Section 6.4.3 for the IETF YANG SID registry). compare Section 6.4.3 for the "IETF YANG SID" registry).
o Private Ranges MUST be marked as "Private" o Private ranges MUST be marked as "Private".
* A Policy of allocation, which clearly identifies if the YANG SID * A policy of allocation, which clearly identifies whether the YANG
Range allocations would be Private, Public or Both. SID Range allocations would be Private, Public, or Both.
* Technical capacity to provide or refer to ".sid" files in a way * Technical capacity to provide or refer to ".sid" files in a way
that meets the security objective of data integrity for these that meets the security objective of data integrity for these
files (see also Section 5). files (see also Section 5).
* Technical capacity to ensure the sustained operation of the * Technical capacity to ensure the sustained operation of the
registry for a period of at least 5 years. If Private registry for a period of at least 5 years. If Private
Registrations are allowed, the period must be of at least 10 Registrations are allowed, the period must be at least 10 years.
years.
If a size of the allocation beyond 1 000 000 is desired, the If a size of the allocation beyond 1 000 000 is desired, the
organization must demonstrate the sustainability of the technical organization must demonstrate the sustainability of the technical
approach for utilizing this size of allocation and how it does not approach for utilizing this size of allocation and how it does not
negatively impact the overall usability of the SID allocation negatively impact the overall usability of the SID allocation
mechanisms; such allocations are preferably placed in the space above mechanisms; such allocations are preferably placed in the space above
4 295 000 000 (64-bit space). 4 295 000 000 (64-bit space).
6.3.2.1. First allocation 6.3.2.1. First Allocation
For a first allocation to be provided, the requesting organization For a first allocation to be provided, the requesting organization
must demonstrate a functional registry infrastructure. must demonstrate a functional registry infrastructure.
6.3.2.2. Consecutive allocations 6.3.2.2. Consecutive Allocations
On subsequent allocation request(s), the organization must On one or more subsequent allocation requests, the organization must
demonstrate the exhaustion of the prior range. These conditions need demonstrate the exhaustion of the prior range. These conditions need
to be asserted by the assigned expert(s). to be asserted by the assigned expert(s).
If that extra-allocation is done within 3 years from the last If such a request for an additional allocation is made within 3 years
allocation, the experts need to discuss this request on the CORE of the last allocation, the experts need to discuss this request on
working group mailing list and consensus needs to be obtained before the CORE Working Group mailing list and consensus needs to be
allocating a new Mega-Range. obtained before allocating a new Mega-Range.
6.3.3. Initial contents of the Registry 6.3.3. Initial Contents of the Registry
The initial entry in this registry is allocated to IANA: This registry contains the following initial entry:
+=======+=========+============+==============+==================+ +=====+=======+==========+==============+=========================+
| Entry | Size | Allocation | Organization | URL | |Entry|Size |Allocation| Organization | URL |
| Point | | | name | | |Point| | | Name | |
+=======+=========+============+==============+==================+ +=====+=======+==========+==============+=========================+
| 0 | 1000000 | Public | IANA | https://iana.org | |0 |1000000|Public | IANA | <https://www.iana.org/> |
+-------+---------+------------+--------------+------------------+ +-----+-------+----------+--------------+-------------------------+
Table 2 Table 2
6.4. Create a new IANA Registry: IETF YANG SID Range Registry (managed 6.4. New IANA Registry: IETF YANG SID Range
by IANA)
6.4.1. Structure 6.4.1. Structure
Each entry in this registry must include: Each entry in this registry must include:
* The SID range entry point. * The SID range entry point.
* The SID range size. * The SID range size.
* The YANG module name. * The YANG module name.
* Document reference. * A document reference (the document making the registration).
6.4.2. Allocation policy 6.4.2. Allocation Policy
The first million SIDs assigned to IANA is subdivided as follows: The first million SIDs assigned to IANA is subdivided as follows:
* The range of 0 to 999 (size 1000) is subject to "IESG Approval" as * The range of 0 to 999 (size 1000) is subject to "IESG Approval" as
defined in [RFC8126]; of these, SID value 0 has been reserved for defined in [RFC8126]; of these, SID value 0 has been reserved for
implementations to internally signify the absence of a SID number implementations to internally signify the absence of a SID number
and does not occur in interchange. and does not occur in interchange.
* The ranges of 1000 to 59,999 (size 59,000) and 100,000 to 299,999 * The ranges of 1000 to 59,999 (size 59,000) and 100,000 to 299,999
(size 200,000) are designated for YANG modules defined in RFCs. (size 200,000) are designated for YANG modules defined in RFCs.
- The IANA policy for additions to this registry is either: - The IANA policy for additions to this registry is:
o "Expert Review" [RFC8126] in case the ".sid" file comes from o "Expert Review" [RFC8126] if the ".sid" file comes from a
a YANG module from an existing RFC, or YANG module from an existing RFC.
o "RFC Required" [RFC8126] otherwise. o "RFC Required" [RFC8126] otherwise.
- The Expert MUST verify that the YANG module for which this - The expert MUST verify that the YANG module for which this
allocation is made has an RFC (existing RFC) OR is on track to allocation is made has an RFC (existing RFC) OR is on track to
become RFC (early allocation with a request from the WG chairs become an RFC (early allocation with a request from the working
as defined by [BCP100]). group chairs as defined by [BCP100]).
* The range of 60,000 to 99,999 (size 40,000) is reserved for * The range of 60,000 to 99,999 (size 40,000) is reserved for
experimental YANG modules. This range MUST NOT be used in experimental YANG modules. This range MUST NOT be used in
operational deployments since these SIDs are not globally unique operational deployments, since these SIDs are not globally unique
which limit their interoperability. The IANA policy for this which limit their interoperability. The IANA policy for this
range is "Experimental use" [RFC8126]. range is "Experimental Use" [RFC8126].
* The range of 300,000 to 999,999 (size 900,000) is "Reserved" as * The range of 300,000 to 999,999 (size 700,000) is "Reserved" as
defined in [RFC8126]. defined in [RFC8126].
+=============+=========+==========================+ +=============+=========+==========================+
| Entry Point | Size | IANA policy | | Entry Point | Size | IANA Policy |
+=============+=========+==========================+ +=============+=========+==========================+
| 0 | 1,000 | IESG Approval | | 0 | 1,000 | IESG Approval |
+-------------+---------+--------------------------+ +-------------+---------+--------------------------+
| 1,000 | 59,000 | RFC Required | | 1,000 | 59,000 | RFC Required |
+-------------+---------+--------------------------+ +-------------+---------+--------------------------+
| 60,000 | 40,000 | Experimental/Private use | | 60,000 | 40,000 | Experimental/Private Use |
+-------------+---------+--------------------------+ +-------------+---------+--------------------------+
| 100,000 | 200,000 | RFC Required | | 100,000 | 200,000 | RFC Required |
+-------------+---------+--------------------------+ +-------------+---------+--------------------------+
| 300,000 | 700,000 | Reserved | | 300,000 | 700,000 | Reserved |
+-------------+---------+--------------------------+ +-------------+---------+--------------------------+
Table 3 Table 3
The size of the SID range allocated for a YANG module is recommended The size of the SID range allocated for a YANG module is recommended
to be a multiple of 50 and to be at least 33% above the current to be a multiple of 50 and to be at least 33% above the current
number of YANG items. This headroom allows assignment within the number of YANG items. This headroom allows assignments within the
same range of new YANG items introduced by subsequent revisions. The same range of new YANG items introduced by subsequent revisions. The
SID range size SHOULD NOT exceed 1000; a larger size may be requested SID range size SHOULD NOT exceed 1000; a larger size may be requested
by the authors if this recommendation is considered insufficient. It by the authors if this recommendation is considered insufficient. It
is important to note that an additional SID range can be allocated to is important to note that an additional SID range can be allocated to
an existing YANG module if the initial range is exhausted; this then an existing YANG module if the initial range is exhausted; this then
just leads to slightly less efficient representation. just leads to a slightly less efficient representation.
In case a SID range is allocated for an existing RFC through the If a SID range is allocated for an existing RFC through the "Expert
"Expert Review" policy, the Document reference field for the given Review" policy, the Reference field for the given allocation should
allocation should point to the RFC that the YANG module is defined point to the RFC that the YANG module is defined in.
in.
In case a SID range is required before publishing the RFC due to If a SID range is required before publishing the RFC due to
implementations needing stable SID values, early allocation as implementations needing stable SID values, early allocation as
defined in [BCP100] can be employed for the "RFC Required" range defined in [BCP100] can be employed for the "RFC Required" range
(Section 2 of [BCP100]). (Section 2 of RFC 7120 [BCP100]).
6.4.3. Publication of the ".sid" file 6.4.3. Publication of the ".sid" File
During publication of an RFC, IANA contacts the designated expert During an RFC's publication process, IANA contacts the designated
team ("the team"), who are responsible for delivering a final SID expert team ("the team"), who are responsible for delivering a final
file for each module defined by the RFC. For a type-3 developer SID file for each module defined by the RFC. For a type-3 developer
(SID-oblivious, see Section 2.4), the team creates a new SID file (SID-oblivious; see Section 2.4), the team creates a new SID file
from each YANG module, see below. For a type-2 (SID-aware) from each YANG module; see below. For a type-2 (SID-aware)
developer, the team first obtains the existing draft SID file from a developer, the team first obtains the existing draft SID file from a
stable reference in the approved draft; for a type-1 (SID-guiding) stable reference in the approved draft; for a type-1 (SID-guiding)
developer, the team extracts the SID file from the approved draft. developer, the team extracts the SID file from the approved draft.
The team uses a tool to generate a final SID file from each YANG The team uses a tool to generate a final SID file from each YANG
module; the final SID file has all SID assignments set to "stable" module; the final SID file has all SID assignments set to "stable"
and the SID file status set to "published". A published ".sid" file and the SID file status set to "published". A published ".sid" file
MUST NOT contain SID assignments with an unstable status. MUST NOT contain SID assignments with a status of "unstable".
For the cases other than type-3 (SID-oblivious), the team feeds the For the cases other than type-3 (SID-oblivious), the team feeds the
existing draft SID file as an input ("reference SID file") to the existing draft SID file as an input ("reference SID file") to the
tool so that the changes resulting from re-generation are minimal. tool so that the changes resulting from regeneration are minimal.
For YANG modules that are revisions of previously published modules, For YANG modules that are revisions of previously published modules,
any existing published SID file needs to serve as reference SID file any existing published SID file needs to serve as a reference SID
for the tool, either during generation of the revised draft (type-1, file for the tool, during generation of either the revised draft SID
type-2) or during generation of the final SID file (type-3). file (type-1, type-2) or the final SID file (type-3).
In any case, the team checks the generated file, including for In any case, the team checks the generated file, including checking
validity as a SID file, for consistency with the SID range for validity as a SID file, for consistency with the SID range
allocations, for full coverage of the YANG items in YANG module, and allocations, for full coverage of the YANG items in the YANG module,
for the best achievable consistency with the existing draft SID file. and for the best achievable consistency with the existing draft SID
file.
The designated experts then give the SID file to IANA to publish into The designated experts then give the SID file to IANA to publish in
the YANG SID Registry (Section 6.5) along with the YANG module. the "IETF YANG SID" registry (Section 6.5) along with the YANG
module.
The ".sid" file MUST NOT be published as part of the RFC: the IANA The ".sid" file MUST NOT be published as part of the RFC: the IANA
Registry is authoritative and a link to it is to be inserted in the registry is authoritative, and a link to it is to be inserted in the
RFC. (Note that the present RFC is an exception to this rule as the RFC. (Note that the present RFC is an exception to this rule, as the
SID file also serves as an example for exposition.) RFCs that need SID file also serves as an example for exposition.) RFCs that need
SIDs assigned to their new modules for use in the text of the SIDs assigned to their new modules for use in the text of the
document, e.g., for examples, need to alert the RFC editor in the document, e.g., for examples, need to alert the RFC Editor in the
draft text that this is the case. Such RFCs cannot be produced by draft text that this is the case. Such RFCs cannot be produced by
type-3 (SID-oblivious) developers: the SIDs used in the text need to type-3 (SID-oblivious) developers: the SIDs used in the text need to
be assigned in the existing draft SID file, and the designated expert be assigned in the existing draft SID file, and the designated expert
team needs to check that the assignments in the final SID file are team needs to check that the assignments in the final SID file are
consistent with the usage in the RFC text or that the approved draft consistent with the usage in the RFC text or that the approved draft
test is changed appropriately. text is changed appropriately.
6.4.4. Initial contents of the registry 6.4.4. Initial Contents of the Registry
Initial entries in this registry are as follows: Initial entries in this registry are as follows:
+=======+====+==============+======================================+ +=====+====+================================+=====================+
| Entry |Size| Module name | Document reference | |Entry|Size|Module Name |Reference |
| Point | | | | |Point| | | |
+=======+====+==============+======================================+ +=====+====+================================+=====================+
| 0 | 1| (Reserved: | RFCXXXX | | 0| 1|(Reserved: not a valid SID) |RFC 9595 |
| | | not a valid | | +-----+----+--------------------------------+---------------------+
| | | SID) | | | 1000| 100|ietf-coreconf |[CORE-COMI] |
+-------+----+--------------+--------------------------------------+ +-----+----+--------------------------------+---------------------+
| 1000 | 100| ietf- | [I-D.ietf-core-comi] | | 1100| 50|ietf-yang-types |[RFC6991] |
| | | coreconf | | +-----+----+--------------------------------+---------------------+
+-------+----+--------------+--------------------------------------+ | 1150| 50|ietf-inet-types |[RFC6991] |
| 1100 | 50| ietf-yang- | [RFC6991] | +-----+----+--------------------------------+---------------------+
| | | types | | | 1200| 50|iana-crypt-hash |[RFC7317] |
+-------+----+--------------+--------------------------------------+ +-----+----+--------------------------------+---------------------+
| 1150 | 50| ietf-inet- | [RFC6991] | | 1250| 50|ietf-netconf-acm |[RFC8341] |
| | | types | | +-----+----+--------------------------------+---------------------+
+-------+----+--------------+--------------------------------------+ | 1300| 50|ietf-sid-file |RFC 9595 |
| 1200 | 50| iana-crypt- | [RFC7317] | +-----+----+--------------------------------+---------------------+
| | | hash | | | 1500| 100|ietf-interfaces |[RFC8343] |
+-------+----+--------------+--------------------------------------+ +-----+----+--------------------------------+---------------------+
| 1250 | 50| ietf- | [RFC8341] | | 1600| 100|ietf-ip |[RFC8344] |
| | | netconf-acm | | +-----+----+--------------------------------+---------------------+
+-------+----+--------------+--------------------------------------+ | 1700| 100|ietf-system |[RFC7317] |
| 1300 | 50| ietf-sid- | RFCXXXX | +-----+----+--------------------------------+---------------------+
| | | file | | | 1800| 400|iana-if-type |[RFC7224] |
+-------+----+--------------+--------------------------------------+ +-----+----+--------------------------------+---------------------+
| 1500 | 100| ietf- | [RFC8343] | | 2400| 50|ietf-voucher |[RFC8366] |
| | | interfaces | | +-----+----+--------------------------------+---------------------+
+-------+----+--------------+--------------------------------------+ | 2450| 50|ietf-constrained-voucher |[CONSTRAINED-VOUCHER]|
| 1600 | 100| ietf-ip | [RFC8344] | +-----+----+--------------------------------+---------------------+
+-------+----+--------------+--------------------------------------+ | 2500| 50|ietf-constrained-voucher-request|[CONSTRAINED-VOUCHER]|
| 1700 | 100| ietf-system | [RFC7317] | +-----+----+--------------------------------+---------------------+
+-------+----+--------------+--------------------------------------+
| 1800 | 400| iana-if-type | [RFC7224] |
+-------+----+--------------+--------------------------------------+
| 2400 | 50| ietf-voucher | [RFC8366] |
+-------+----+--------------+--------------------------------------+
| 2450 | 50| ietf- | [I-D.ietf-anima-constrained-voucher] |
| | | constrained- | |
| | | voucher | |
+-------+----+--------------+--------------------------------------+
| 2500 | 50| ietf- | [I-D.ietf-anima-constrained-voucher] |
| | | constrained- | |
| | | voucher- | |
| | | request | |
+-------+----+--------------+--------------------------------------+
Table 4 Table 4
// RFC Ed.: replace XXXX with RFC number assigned to this draft.
For allocation, RFC publication of the YANG module is required as per For allocation, RFC publication of the YANG module is required as per
[RFC8126]. The YANG module must be registered in the "YANG module [RFC8126]. The YANG module must be registered in the "YANG Module
Name" registry according to the rules specified in Section 14 of Names" registry according to the rules specified in Section 14 of
[RFC6020]. [RFC6020].
6.5. Create new IANA Registry: "IETF YANG SID Registry" 6.5. New IANA Registry: IETF YANG SID
The name of this registry is "IETF YANG SID Registry". This registry The name of this registry is "IETF YANG SID". This registry is used
is used to record the allocation of SIDs for individual YANG module to record the allocation of SIDs for individual YANG module items.
items.
6.5.1. Structure 6.5.1. Structure
Each entry in this registry must include: Each entry in this registry must include:
* The YANG module name. This module name must be present in the * The YANG module name. This module name must be present in the
"Name" column of the "YANG Module Names" registry. "Name" column of the "YANG Module Names" registry.
* A URI for the associated ".yang" file. This file link must be * A URI for the associated ".yang" file. This file link must be
present in the "File" column of the "YANG Module Names" registry. present in the "File" column of the "YANG Module Names" registry.
* The URI for the ".sid" file which defines the allocation. The * The URI for the ".sid" file that defines the allocation. The
".sid" file is stored by IANA. ".sid" file is stored by IANA.
* The number of actually allocated SIDs in the ".sid" file. * The number of actually allocated SIDs in the ".sid" file.
6.5.2. Allocation policy 6.5.2. Allocation Policy
The allocation policy is Expert review. The Expert MUST ensure that The allocation policy is "Expert Review" [RFC8126]. The expert MUST
the following conditions are met: ensure that the following conditions are met:
* The ".sid" file has a valid structure: * The ".sid" file has a valid structure:
- The ".sid" file MUST be a valid JSON file following the - The ".sid" file MUST be a valid JSON file following the
structure of the module defined in RFCXXXX (RFC Ed: replace XXX structure of the module defined in this document.
with RFC number assigned to this draft).
* The ".sid" file allocates individual SIDs ONLY in the YANG SID * The ".sid" file allocates individual SIDs ONLY in the YANG SID
Ranges for this YANG module (as allocated in the IETF YANG SID Ranges for this YANG module (as allocated in the "IETF YANG SID
Range Registry): Range" registry):
- All SIDs in this ".sid" file MUST be within the ranges - All SIDs in this ".sid" file MUST be within the ranges
allocated to this YANG module in the "IETF YANG SID Range allocated to this YANG module in the "IETF YANG SID Range"
Registry". registry.
* If another ".sid" file has already allocated SIDs for this YANG * If another ".sid" file has already allocated SIDs for this YANG
module (e.g. for older or newer versions of the YANG module), the module (e.g., for older or newer versions of the YANG module), the
YANG items are assigned the same SIDs as in the other ".sid" file. YANG items are assigned the same SIDs as those in the other ".sid"
file.
* If there is an older version of the ".sid" file, all allocated * If there is an older version of the ".sid" file, all allocated
SIDs from that version are still present in the current version of SIDs from that version are still present in the current version of
the ".sid" file. the ".sid" file.
6.5.3. Recursive Allocation of YANG SID Range at Document Adoption 6.5.3. Recursive Allocation of YANG SID Range at Document Adoption
Due to the difficulty in changing SID values during IETF document Due to the difficulty in changing SID values during IETF document
processing, it is expected that most documents will ask for SID range processing, it is expected that most documents will ask for SID range
allocations using Early Allocations [BCP100]. The details of the allocations using early allocations [BCP100]. The details of the
Early Allocation to be requested, including the timeline envisioned, early allocation to be requested, including the timeline envisioned,
should be included in any Working Group Adoption call. Prior to should be included in any working group adoption call. Prior to
Working Group Adoption, an internet draft author can use the working group adoption, an Internet-Draft author can use the
experimental SID range (as per Section 6.4.2) for their SIDs experimental SID range (as per Section 6.4.2) for their SID
allocations or other values that do not create ambiguity with other allocations or other values that do not create ambiguity with other
SID uses (for example they can use a range that comes from a non-IANA SID uses (for example, they can use a range that comes from a non-
managed "YANG SID Mega-Range" registry). IANA-managed registry of YANG SID mega-ranges).
After Working Group Adoption, any modification of a ".sid" file is After working group adoption, any modification of a ".sid" file is
expected to be discussed on the mailing list of the appropriate expected to be discussed on the mailing lists of the appropriate
Working Groups. Specific attention should be paid to implementers' working groups. Specific attention should be paid to implementers'
opinion after Working Group Last Call if a SID value is to change its opinions after Working Group Last Call if a SID value is to change
meaning. In all cases, a ".sid" file and the SIDs associated with it its meaning. In all cases, a ".sid" file and the SIDs associated
are subject to change before the publication of an internet draft as with it are subject to change before the publication of an Internet-
an RFC. Draft as an RFC.
During the early use of SIDs, many existing, previously published During the early use of SIDs, many existing, previously published
YANG modules will not have SID allocations. For an allocation to be YANG modules will not have SID allocations. For an allocation to be
useful the included YANG modules may also need to have SID useful, the included YANG modules may also need to have SID
allocations made, in a process that will generally analogous to that allocations made, in a process that will generally be analogous to
in Section 6.4.3 for the type-3 (SID-oblivious) case. that in Section 6.4.3 for the type-3 (SID-oblivious) case.
The Expert Reviewer who performs the (Early) Allocation analysis will The expert reviewer who performs the (early) allocation analysis will
need to go through the list of included YANG modules and perform SID need to go through the list of included YANG modules and perform SID
allocations for those modules as well. allocations for those modules as well.
* If the document is a published RFC, then the allocation of SIDs * If the document is a published RFC, then the allocation of SIDs
for its referenced YANG modules is permanent. The Expert Reviewer for its referenced YANG modules is permanent. The expert reviewer
provides the generated ".sid" file to IANA for registration. provides the generated ".sid" file to IANA for registration.
* If the document is an unprocessed Internet-Draft adopted in a WG, * If the document is an unprocessed Internet-Draft adopted in a
then an Early Allocation is performed for this document as well. working group, then an early allocation is performed for this
Early Allocations require approval by an IESG Area Director. An document as well. Early allocations require approval by an IESG
early allocation which requires additional allocations will list area director. An early allocation that requires additional
the other allocations in its description, and will be cross-posted allocations will list the other allocations in its description and
to the mailing lists of any other working groups concerned. will be cross-posted to the mailing lists of any other working
groups concerned.
* A YANG module which references a module in a document which has * A YANG module that references a module in a document that has not
not yet been adopted by any working group will be unable to yet been adopted by any working group will be unable to perform an
perform an Early Allocation for that other document until it is early allocation for that other document until it is adopted by a
adopted by a working group. As described in [BCP100], an AD working group. As described in [BCP100], an AD-sponsored document
Sponsored document acts as if it had a working group. The acts as if it had a working group. The approving AD may also
approving AD may also exempt a document from this policy by exempt a document from this policy by agreeing to AD-sponsor the
agreeing to AD Sponsor the document. document.
At the end of the IETF process all the dependencies of a given module At the end of the IETF process, all the dependencies of a given
for which SIDs are assigned, should also have SIDs assigned. Those module for which SIDs are assigned should also have SIDs assigned.
dependencies' assignments should be permanent (not Early Allocation). Those dependencies' assignments should be permanent (not early
allocation).
A previously SID-allocated YANG module which changes its references A previously SID-allocated YANG module that changes its references to
to include a YANG module for which there is no SID allocation needs include a YANG module for which there is no SID allocation needs to
to repeat the Early Allocation process. repeat the early allocation process.
[BCP100] defines a time limit for the validity of Early Allocations, [BCP100] defines a time limit for the validity of early allocations,
after which they expire unless they are renewed. [BCP100] also says: after which they expire unless they are renewed. Section 3.3 of RFC
7120 [BCP100] also says:
| Note that if a document is submitted for review to the IESG and at | Note that if a document is submitted for review to the IESG, and
| the time of submission some early allocations are valid (not | at the time of submission some early allocations are valid (not
| expired), these allocations should not be expired while the | expired), these allocations must not be considered to have expired
| document is under IESG consideration or waiting in the RFC | while the document is under IESG consideration or is awaiting
| Editor's queue after approval by the IESG. | publication in the RFC Editor's queue after approval by the IESG.
|
| -- RFC7120 (BCP100), Section 3.3
| https://www.rfc-editor.org/rfc/rfc7120.html#section-3.3
6.5.4. Initial contents of the registry 6.5.4. Initial Contents of the Registry
None. At the time of writing, this registry does not contain any entries.
6.6. Register Media Type and Content-Format 6.6. Media Type and Content-Format Registration
6.6.1. Media Type application/yang-sid+json 6.6.1. Media Type application/yang-sid+json
This document adds the following Media-Type to the "Media Types" This document adds the following media type to the "Media Types"
registry. registry.
+===============+===========================+===========+ +===============+===========================+===========+
| Name | Template | Reference | | Name | Template | Reference |
+===============+===========================+===========+ +===============+===========================+===========+
| yang-sid+json | application/yang-sid+json | RFC XXXX | | yang-sid+json | application/yang-sid+json | RFC 9595 |
+---------------+---------------------------+-----------+ +---------------+---------------------------+-----------+
Table 5: SID File Media-Type Registration Table 5: SID File Media Type Registration
// RFC Ed.: please replace RFC XXXX with this RFC number and remove
this note.
Type name: application Type name: application
Subtype name: yang-sid+json Subtype name: yang-sid+json
Required parameters: N/A Required parameters: N/A
Optional parameters: N/A Optional parameters: N/A
Encoding considerations: binary (UTF-8) Encoding considerations: binary (UTF-8)
Security considerations: see Section 5 of RFC XXXX
Published specification: RFC XXXX Security considerations: See Section 5 of RFC 9595.
Applications that use this media type: applications that need to
Published specification: RFC 9595
Applications that use this media type: Applications that need to
obtain YANG SIDs to interchange YANG-modeled data in a concise and obtain YANG SIDs to interchange YANG-modeled data in a concise and
efficient representation efficient representation.
Fragment identifier considerations: The syntax and semantics of Fragment identifier considerations: The syntax and semantics of
fragment identifiers specified for "application/yang-sid+json" is fragment identifiers specified for "application/yang-sid+json" is
as specified for "application/json". (At publication of this as specified for "application/json". (At publication of this
document, there is no fragment identification syntax defined for document, there is no fragment identification syntax defined for
"application/json".) "application/json".)
Additional information:
Magic number(s): N/A Additional information:
File extension(s): .sid Magic number(s): N/A
File extension(s): .sid
Macintosh file type code(s): N/A
Macintosh file type code(s): N/A
Person & email address to contact for further information: CORE WG Person & email address to contact for further information: CORE WG
mailing list (core@ietf.org), or IETF Applications and Real-Time mailing list (core@ietf.org) or IETF Applications and Real-Time
Area (art@ietf.org) Area (art@ietf.org)
Intended usage: COMMON Intended usage: COMMON
Restrictions on usage: none Restrictions on usage: none
Author/Change controller: IETF Author/Change controller: IETF
6.6.2. CoAP Content-Format 6.6.2. CoAP Content-Format
This document adds the following Content-Format to the "CoAP Content- This document adds the following Content-Format to the "CoAP Content-
Formats", within the "Constrained RESTful Environments (CoRE) Formats" registry within the "Constrained RESTful Environments (CoRE)
Parameters" registry, where TBD1 comes from the "IETF Review" 256-999 Parameters" group of registries, where 260 has been assigned from the
range. "IETF Review" (256-9999) range.
+===========================+================+======+===========+
| Content Type | Content Coding | ID | Reference |
+===========================+================+======+===========+
| application/yang-sid+json | - | TBD1 | RFC XXXX |
+---------------------------+----------------+------+-----------+
Table 6: SID File Content-format Registration +===========================+================+=====+===========+
| Content Type | Content Coding | ID | Reference |
+===========================+================+=====+===========+
| application/yang-sid+json | - | 260 | RFC 9595 |
+---------------------------+----------------+-----+-----------+
// RFC Ed.: please replace TBD1 with the assigned ID, remove the Table 6: SID File Content-Format Registration
requested range, and remove this note.
// RFC Ed.: please replace RFC XXXX with this RFC number and remove
this note.
7. References 7. References
7.1. Normative References 7.1. Normative References
[BCP100] Cotton, M., "Early IANA Allocation of Standards Track Code [BCP100] Best Current Practice 100,
<https://www.rfc-editor.org/info/bcp100>.
At the time of writing, this BCP comprises the following:
Cotton, M., "Early IANA Allocation of Standards Track Code
Points", BCP 100, RFC 7120, DOI 10.17487/RFC7120, January Points", BCP 100, RFC 7120, DOI 10.17487/RFC7120, January
2014, <https://www.rfc-editor.org/rfc/rfc7120>. 2014, <https://www.rfc-editor.org/info/rfc7120>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997, DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/rfc/rfc2119>. <https://www.rfc-editor.org/info/rfc2119>.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004, DOI 10.17487/RFC3688, January 2004,
<https://www.rfc-editor.org/rfc/rfc3688>. <https://www.rfc-editor.org/info/rfc3688>.
[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
and A. Bierman, Ed., "Network Configuration Protocol
(NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
<https://www.rfc-editor.org/info/rfc6241>.
[RFC6991] Schoenwaelder, J., Ed., "Common YANG Data Types", [RFC6991] Schoenwaelder, J., Ed., "Common YANG Data Types",
RFC 6991, DOI 10.17487/RFC6991, July 2013, RFC 6991, DOI 10.17487/RFC6991, July 2013,
<https://www.rfc-editor.org/rfc/rfc6991>. <https://www.rfc-editor.org/info/rfc6991>.
[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", [RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
RFC 7950, DOI 10.17487/RFC7950, August 2016, RFC 7950, DOI 10.17487/RFC7950, August 2016,
<https://www.rfc-editor.org/rfc/rfc7950>. <https://www.rfc-editor.org/info/rfc7950>.
[RFC7951] Lhotka, L., "JSON Encoding of Data Modeled with YANG", [RFC7951] Lhotka, L., "JSON Encoding of Data Modeled with YANG",
RFC 7951, DOI 10.17487/RFC7951, August 2016, RFC 7951, DOI 10.17487/RFC7951, August 2016,
<https://www.rfc-editor.org/rfc/rfc7951>. <https://www.rfc-editor.org/info/rfc7951>.
[RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF [RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017, Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
<https://www.rfc-editor.org/rfc/rfc8040>. <https://www.rfc-editor.org/info/rfc8040>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/rfc/rfc8174>. May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data [RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
Interchange Format", STD 90, RFC 8259, Interchange Format", STD 90, RFC 8259,
DOI 10.17487/RFC8259, December 2017, DOI 10.17487/RFC8259, December 2017,
<https://www.rfc-editor.org/rfc/rfc8259>. <https://www.rfc-editor.org/info/rfc8259>.
[RFC8341] Bierman, A. and M. Bjorklund, "Network Configuration
Access Control Model", STD 91, RFC 8341,
DOI 10.17487/RFC8341, March 2018,
<https://www.rfc-editor.org/info/rfc8341>.
[RFC8791] Bierman, A., Björklund, M., and K. Watsen, "YANG Data [RFC8791] Bierman, A., Björklund, M., and K. Watsen, "YANG Data
Structure Extensions", RFC 8791, DOI 10.17487/RFC8791, Structure Extensions", RFC 8791, DOI 10.17487/RFC8791,
June 2020, <https://www.rfc-editor.org/rfc/rfc8791>. June 2020, <https://www.rfc-editor.org/info/rfc8791>.
7.2. Informative References 7.2. Informative References
[I-D.bormann-t2trg-deref-id] [CONSTRAINED-VOUCHER]
Bormann, C. and C. Amsüss, "The "dereferenceable Richardson, M., van der Stok, P., Kampanakis, P., and E.
identifier" pattern", Work in Progress, Internet-Draft,
draft-bormann-t2trg-deref-id-02, 19 December 2023,
<https://datatracker.ietf.org/doc/html/draft-bormann-
t2trg-deref-id-02>.
[I-D.ietf-anima-constrained-voucher]
Richardson, M., Van der Stok, P., Kampanakis, P., and E.
Dijk, "Constrained Bootstrapping Remote Secure Key Dijk, "Constrained Bootstrapping Remote Secure Key
Infrastructure (BRSKI)", Work in Progress, Internet-Draft, Infrastructure (cBRSKI)", Work in Progress, Internet-
draft-ietf-anima-constrained-voucher-22, 21 November 2023, Draft, draft-ietf-anima-constrained-voucher-24, 3 March
<https://datatracker.ietf.org/doc/html/draft-ietf-anima- 2024, <https://datatracker.ietf.org/doc/html/draft-ietf-
constrained-voucher-22>. anima-constrained-voucher-24>.
[I-D.ietf-core-comi]
Veillette, M., Van der Stok, P., Pelov, A., Bierman, A.,
and C. Bormann, "CoAP Management Interface (CORECONF)",
Work in Progress, Internet-Draft, draft-ietf-core-comi-16,
4 September 2023, <https://datatracker.ietf.org/doc/html/
draft-ietf-core-comi-16>.
[I-D.ietf-core-yang-library] [CORE-COMI]
Veillette, M. and I. Petrov, "Constrained YANG Module Veillette, M. V., Ed., van der Stok, P., Ed., Pelov, A.,
Library", Work in Progress, Internet-Draft, draft-ietf- Ed., Bierman, A., and C. Bormann, Ed., "CoAP Management
core-yang-library-03, 11 January 2021, Interface (CORECONF)", Work in Progress, Internet-Draft,
draft-ietf-core-comi-17, 4 March 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-core- <https://datatracker.ietf.org/doc/html/draft-ietf-core-
yang-library-03>. comi-17>.
[PYANG] Bjorklund, M., "An extensible YANG validator and converter [DEREF-ID] Bormann, C. and C. Amsüss, "The 'dereferenceable
in python", <https://github.com/mbj4668/pyang>. identifier' pattern", Work in Progress, Internet-Draft,
draft-bormann-t2trg-deref-id-03, 2 March 2024,
<https://datatracker.ietf.org/doc/html/draft-bormann-
t2trg-deref-id-03>.
[PYANG] Björklund, M., "An extensible YANG validator and converter
in python", commit 25f69e8, March 2024,
<https://github.com/mbj4668/pyang>.
[RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for [RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for
the Network Configuration Protocol (NETCONF)", RFC 6020, the Network Configuration Protocol (NETCONF)", RFC 6020,
DOI 10.17487/RFC6020, October 2010, DOI 10.17487/RFC6020, October 2010,
<https://www.rfc-editor.org/rfc/rfc6020>. <https://www.rfc-editor.org/info/rfc6020>.
[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
and A. Bierman, Ed., "Network Configuration Protocol
(NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
<https://www.rfc-editor.org/rfc/rfc6241>.
[RFC7224] Bjorklund, M., "IANA Interface Type YANG Module", [RFC7224] Bjorklund, M., "IANA Interface Type YANG Module",
RFC 7224, DOI 10.17487/RFC7224, May 2014, RFC 7224, DOI 10.17487/RFC7224, May 2014,
<https://www.rfc-editor.org/rfc/rfc7224>. <https://www.rfc-editor.org/info/rfc7224>.
[RFC7228] Bormann, C., Ersue, M., and A. Keranen, "Terminology for [RFC7228] Bormann, C., Ersue, M., and A. Keranen, "Terminology for
Constrained-Node Networks", RFC 7228, Constrained-Node Networks", RFC 7228,
DOI 10.17487/RFC7228, May 2014, DOI 10.17487/RFC7228, May 2014,
<https://www.rfc-editor.org/rfc/rfc7228>. <https://www.rfc-editor.org/info/rfc7228>.
[RFC7317] Bierman, A. and M. Bjorklund, "A YANG Data Model for [RFC7317] Bierman, A. and M. Bjorklund, "A YANG Data Model for
System Management", RFC 7317, DOI 10.17487/RFC7317, August System Management", RFC 7317, DOI 10.17487/RFC7317, August
2014, <https://www.rfc-editor.org/rfc/rfc7317>. 2014, <https://www.rfc-editor.org/info/rfc7317>.
[RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for [RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for
Writing an IANA Considerations Section in RFCs", BCP 26, Writing an IANA Considerations Section in RFCs", BCP 26,
RFC 8126, DOI 10.17487/RFC8126, June 2017, RFC 8126, DOI 10.17487/RFC8126, June 2017,
<https://www.rfc-editor.org/rfc/rfc8126>. <https://www.rfc-editor.org/info/rfc8126>.
[RFC8341] Bierman, A. and M. Bjorklund, "Network Configuration
Access Control Model", STD 91, RFC 8341,
DOI 10.17487/RFC8341, March 2018,
<https://www.rfc-editor.org/rfc/rfc8341>.
[RFC8343] Bjorklund, M., "A YANG Data Model for Interface [RFC8343] Bjorklund, M., "A YANG Data Model for Interface
Management", RFC 8343, DOI 10.17487/RFC8343, March 2018, Management", RFC 8343, DOI 10.17487/RFC8343, March 2018,
<https://www.rfc-editor.org/rfc/rfc8343>. <https://www.rfc-editor.org/info/rfc8343>.
[RFC8344] Bjorklund, M., "A YANG Data Model for IP Management", [RFC8344] Bjorklund, M., "A YANG Data Model for IP Management",
RFC 8344, DOI 10.17487/RFC8344, March 2018, RFC 8344, DOI 10.17487/RFC8344, March 2018,
<https://www.rfc-editor.org/rfc/rfc8344>. <https://www.rfc-editor.org/info/rfc8344>.
[RFC8366] Watsen, K., Richardson, M., Pritikin, M., and T. Eckert, [RFC8366] Watsen, K., Richardson, M., Pritikin, M., and T. Eckert,
"A Voucher Artifact for Bootstrapping Protocols", "A Voucher Artifact for Bootstrapping Protocols",
RFC 8366, DOI 10.17487/RFC8366, May 2018, RFC 8366, DOI 10.17487/RFC8366, May 2018,
<https://www.rfc-editor.org/rfc/rfc8366>. <https://www.rfc-editor.org/info/rfc8366>.
[RFC8407] Bierman, A., "Guidelines for Authors and Reviewers of [RFC8407] Bierman, A., "Guidelines for Authors and Reviewers of
Documents Containing YANG Data Models", BCP 216, RFC 8407, Documents Containing YANG Data Models", BCP 216, RFC 8407,
DOI 10.17487/RFC8407, October 2018, DOI 10.17487/RFC8407, October 2018,
<https://www.rfc-editor.org/rfc/rfc8407>. <https://www.rfc-editor.org/info/rfc8407>.
[RFC8792] Watsen, K., Auerswald, E., Farrel, A., and Q. Wu, [RFC8792] Watsen, K., Auerswald, E., Farrel, A., and Q. Wu,
"Handling Long Lines in Content of Internet-Drafts and "Handling Long Lines in Content of Internet-Drafts and
RFCs", RFC 8792, DOI 10.17487/RFC8792, June 2020, RFCs", RFC 8792, DOI 10.17487/RFC8792, June 2020,
<https://www.rfc-editor.org/rfc/rfc8792>. <https://www.rfc-editor.org/info/rfc8792>.
[RFC9195] Lengyel, B. and B. Claise, "A File Format for YANG [RFC9195] Lengyel, B. and B. Claise, "A File Format for YANG
Instance Data", RFC 9195, DOI 10.17487/RFC9195, February Instance Data", RFC 9195, DOI 10.17487/RFC9195, February
2022, <https://www.rfc-editor.org/rfc/rfc9195>. 2022, <https://www.rfc-editor.org/info/rfc9195>.
[RFC9254] Veillette, M., Ed., Petrov, I., Ed., Pelov, A., Bormann, [RFC9254] Veillette, M., Ed., Petrov, I., Ed., Pelov, A., Bormann,
C., and M. Richardson, "Encoding of Data Modeled with YANG C., and M. Richardson, "Encoding of Data Modeled with YANG
in the Concise Binary Object Representation (CBOR)", in the Concise Binary Object Representation (CBOR)",
RFC 9254, DOI 10.17487/RFC9254, July 2022, RFC 9254, DOI 10.17487/RFC9254, July 2022,
<https://www.rfc-editor.org/rfc/rfc9254>. <https://www.rfc-editor.org/info/rfc9254>.
[YANG-LIBRARY]
Veillette, M., Ed. and I. Petrov, Ed., "Constrained YANG
Module Library", Work in Progress, Internet-Draft, draft-
ietf-core-yang-library-03, 11 January 2021,
<https://datatracker.ietf.org/doc/html/draft-ietf-core-
yang-library-03>.
[yangcatalog] [yangcatalog]
"YANG Catalog", <https://yangcatalog.org>. "YANG Catalog", <https://yangcatalog.org>.
Appendix A. ".sid" file example Appendix A. ".sid" File Example
The following ".sid" file (ietf-system@2014-08-06.sid) has been The following ".sid" file ('ietf-system@2014-08-06.sid') has been
generated using the following yang modules: generated using the following YANG modules:
* ietf-system@2014-08-06.yang (defined in [RFC7317]) * 'ietf-system@2014-08-06.yang' (defined in [RFC7317])
* ietf-yang-types@2013-07-15.yang (defined in [RFC6991]) * 'ietf-yang-types@2013-07-15.yang' (defined in [RFC6991])
* ietf-inet-types@2013-07-15.yang (defined in [RFC6991]) * 'ietf-inet-types@2013-07-15.yang' (defined in [RFC6991])
* ietf-netconf-acm@2018-02-14.yang (defined in [RFC8341]) * 'ietf-netconf-acm@2018-02-14.yang' (defined in [RFC8341])
* iana-crypt-hash@2014-08-06.yang (defined in [RFC7317]) * 'iana-crypt-hash@2014-08-06.yang' (defined in [RFC7317])
For purposes of exposition, line breaks have been introduced below in For purposes of exposition, per [RFC8792], line breaks have been
some JSON strings that represent overly long identifiers. introduced below in some JSON strings that represent overly long
identifiers.
=============== NOTE: '\' line wrapping per RFC 8792 ================ =============== NOTE: '\' line wrapping per RFC 8792 ================
{ {
"ietf-sid-file:sid-file": { "ietf-sid-file:sid-file": {
"module-name": "ietf-system", "module-name": "ietf-system",
"module-revision": "2014-08-06", "module-revision": "2014-08-06",
"description": "Example sid file", "description": "Example sid file",
"dependency-revision": [ "dependency-revision": [
{ {
skipping to change at page 44, line 41 skipping to change at line 2018
{ {
"namespace": "data", "namespace": "data",
"identifier": "/ietf-system:system/radius/server/udp/shared-\ "identifier": "/ietf-system:system/radius/server/udp/shared-\
secret", secret",
"sid": "1774" "sid": "1774"
} }
] ]
} }
} }
Figure 3: Example .sid file (ietf-system, with extra line-breaks) Figure 3: Example .sid File ('ietf-system', with Extra Line Breaks)
Appendix B. SID auto generation Appendix B. SID Autogeneration
Assignment of SIDs to YANG items SHOULD be automated. The The assignment of SIDs to YANG items SHOULD be automated. The
recommended process to assign SIDs is as follows: recommended process to assign SIDs is as follows:
1. A tool extracts the different items defined for a specific YANG 1. A tool extracts the different items defined for a specific YANG
module. module.
2. The list of items is sorted in alphabetical order, 'namespace' in 2. The list of items is sorted in alphabetical order. 'namespace'
descending order, 'identifier' in ascending order. The entries are sorted in descending order, and 'identifier' entries
'namespace' and 'identifier' formats are described in the YANG are sorted in ascending order. The 'namespace' and 'identifier'
module 'ietf-sid-file' defined in Section 4. formats are described in the YANG module 'ietf-sid-file' defined
in Section 4.
3. SIDs are assigned sequentially from the entry point up to the 3. SIDs are assigned sequentially from the entry point up to the
size of the registered SID range. This approach is recommended size of the registered SID range. This approach is recommended
to minimize the serialization overhead, especially when delta to minimize the serialization overhead, especially when the delta
between a reference SID and the current SID is used by protocols between a reference SID and the current SID is used by protocols
aiming to reduce message size. aiming to reduce message size.
4. If the number of items exceeds the SID range(s) allocated to a 4. If the number of items exceeds the SID range(s) allocated to a
YANG module, an extra range is added for subsequent assignments. YANG module, an extra range is added for subsequent assignments.
5. The "dependency-revision" should reflect the revision numbers of 5. The 'dependency-revision' list item should reflect the revision
each YANG module that the YANG module imports at the moment of numbers of each YANG module that the YANG module imports at the
the generation. moment of file generation.
When updating a YANG module that is in active use, the existing SID When updating a YANG module that is in active use, the existing SID
assignments are maintained. (In contrast, when evolving an early assignments are maintained. (In contrast, when evolving an early
draft that has not yet been adopted by a community of developers, SID draft that has not yet been adopted by a community of developers, SID
assignments are often better done from scratch after a revision.) If assignments are often better done from scratch after a revision.) If
the name of a schema node changes, but the data remain structurally the name of a schema node changes but the data remain structurally
and semantically similar to what was previously available under an and semantically similar to what was previously available under an
old name, the SID that was used for the old name MAY continue to be old name, the SID that was used for the old name MAY continue to be
used for the new name. If the meaning of an item changes, a new SID used for the new name. If the meaning of an item changes, a new SID
MAY be assigned to it; this is particularly useful to allow the new MAY be assigned to it; this is particularly useful for allowing the
SID to identify the new structure or semantics of the item. If the new SID to identify the new structure or semantics of the item. If
YANG data type changes in a new revision of a published module, such the YANG data type changes in a new revision of a published module
that the resulting CBOR encoding is changed, then implementations such that the resulting CBOR encoding is changed, then
will be aided significantly if a new SID is assigned. Note that implementations will be aided significantly if a new SID is assigned.
these decisions are generally at the discretion of the YANG module Note that these decisions are generally at the discretion of the YANG
author, who should decide if the benefits of a manual intervention module author, who should decide if the benefits of a manual
are worth the deviation from automatic assignment. intervention are worth the deviation from automatic assignment.
In case of an update to an existing ".sid" file, an additional step In the case of an update to an existing ".sid" file, an additional
is needed that increments the ".sid" file version number. If there step is needed that increments the ".sid" file version number. If
was no version number in the previous version of the ".sid" file, 0 there was no version number in the previous version of the ".sid"
is assumed as the version number of the old version of the ".sid" file, 0 is assumed to be the version number of the old version of the
file and the version number is 1 for the new ".sid" file. Apart from ".sid" file and the version number is 1 for the new ".sid" file.
that, changes of ".sid" files can also be automated using the same Apart from that, changes to ".sid" files can also be automated using
method described above, only unassigned YÀNG items are processed at the same method as that described above, except that in step #3, only
step #3. Already existing items in the ".sid" file should not be unassigned YANG items are processed. Already-existing items in the
given new SIDs. ".sid" file should not be given new SIDs.
Note that ".sid" file versions are specific to a YANG module Note that ".sid" file versions are specific to a YANG module
revision. For each new YANG module or each new revision of an revision. For each new YANG module or each new revision of an
existing YANG module, the version number of the initial ".sid" file existing YANG module, the version number of the initial ".sid" file
should either be 0 or should not be present. either (1) should be 0 or (2) should not be present.
Note also that RPC or action "input" and "output" YANG items MUST Note also that RPC or action "input" and "output" YANG items MUST
always be assigned SID even if they don't contain further YANG items. always be assigned SIDs even if they don't contain further YANG
The reason for this requirement is that other modules can augment the items. The reason for this requirement is that other modules can
given module and those SIDs might be necessary. augment the given module and those SIDs might be necessary.
Appendix C. ".sid" file lifecycle Appendix C. ".sid" File Lifecycle
Before assigning SIDs to their YANG modules, YANG module authors must Before assigning SIDs to their YANG modules, YANG module authors must
acquire a SID range from a "YANG SID Range Registry". If the YANG acquire a SID range from a registry of YANG SID ranges. If the YANG
module is part of an IETF draft or RFC, the SID range need to be module is part of an IETF Internet-Draft or RFC, the SID range needs
acquired from the "IETF YANG SID Range Registry" as defined in to be acquired from the "IETF YANG SID Range" registry as defined in
Section 6.4. For the other YANG modules, the authors can acquire a Section 6.4. For the other YANG modules, the authors can choose to
SID range from any "YANG SID Range Registry" of their choice. acquire a SID range from any registry of YANG SID ranges.
Once the SID range is acquired, owners can use it to generate ".sid" Once the SID range is acquired, owners can use it to generate one or
file/s for their YANG module/s. It is recommended to leave some more ".sid" files for their YANG module or modules. It is
unallocated SIDs following the allocated range in each ".sid" file in recommended to leave some unallocated SIDs following the allocated
order to allow better evolution of the YANG module in the future. range in each ".sid" file in order to allow better evolution of the
Generation of ".sid" files should be performed using an automated owners' YANG modules in the future. Generation of ".sid" files
tool. Note that ".sid" files can only be generated for YANG modules should be performed using an automated tool. Note that ".sid" files
and not for submodules. can only be generated for YANG modules and not for submodules.
C.1. ".sid" File Creation C.1. ".sid" File Creation
The following activity diagram summarizes the creation of a YANG The following activity diagram summarizes the creation of a YANG
module and its associated ".sid" file. module and its associated ".sid" file.
+---------------+ +---------------+
o | Creation of a | o | Creation of a |
-+- -->| YANG module | -+- -->| YANG module |
/ \ +------+--------+ / \ +------+--------+
| |
v v
.-------------. .-------------.
/ Standardized \ yes / Standardized \ yes
\ YANG module ? /------------+ \ YANG module? /------------+
'-----+-------' | '-----+-------' |
| no | | no |
v v v v
.-------------. +---------------+ .-------------. +---------------+
+--> / Constrained \ yes | SID range | +--> / Constrained \ yes | SID range |
| \ application ? /---->| registration |<--------+ | \ application? /---->| registration |<--------+
| '-----+-------' +------+--------+ | | '-----+-------' +------+--------+ |
| | no | | | | no | |
| v v | | v v |
| +---------------+ +---------------+ | | +---------------+ +---------------+ |
+----+ YANG module | | SID sub-range | | +----+ YANG module | | SID subrange | |
| update | | assignment |<---------+ | update | | assignment |<---------+
+---------------+ +-------+-------+ | +---------------+ +-------+-------+ |
| | | |
v | v |
+---------------+ +------+------+ +---------------+ +------+------+
| ".sid" file | | Rework YANG | | ".sid" file | | Rework YANG |
| generation | | module | | generation | | module |
+-------+-------+ +-------------+ +-------+-------+ +-------------+
| ^ | ^
v | v |
.----------. yes | .----------. yes |
/ Work in \ ------------+ / Work in \ ------------+
\ progress / \ progress? /
'----+-----' '----+-----'
| no | no
v v
.-------------. .-------------.
/ RFC \ no / RFC \ no
\ publication? /--------------+ \ publication? /--------------+
'------+------' | '------+------' |
yes | | yes | |
v v v v
+---------------+ +---------------+ +---------------+ +---------------+
| IANA | | Third party | | IANA | | Third-party |
| registration | | registration | | registration | | registration |
+-------+-------+ +-------+-------+ +-------+-------+ +-------+-------+
| | | |
+------------------------+ +------------------------+
v v
[DONE] [DONE]
Figure 4: SID Lifecycle Figure 4: SID Lifecycle
C.2. ".sid" File Update C.2. ".sid" File Update
The following Activity diagram summarizes the update of a YANG module The following activity diagram summarizes the update of a YANG module
and its associated ".sid" file. and its associated ".sid" file.
+---------------+ +---------------+
o | Update of the | o | Update of the |
-+- -->| YANG module | -+- -->| YANG module |
/ \ | or include(s) | / \ | or include(s) |
| or import(s) | | or import(s) |
+------+--------+ +------+--------+
| |
v v
.-------------. .-------------.
/ New items \ yes / New items \ yes
\ created ? /------+ \ created? /------+
'------+------' | '------+------' |
| no v | no v
| .-------------. +----------------+ | .-------------. +----------------+
| / SID range \ yes | Extra sub-range| | / SID range \ yes | Extra subrange |
| \ exhausted ? /---->| assignment | | \ exhausted? /---->| assignment |
| '------+------' +-------+--------+ | '------+------' +-------+--------+
| | no | | | no |
| +---------------------+ | +---------------------+
| | | |
| v | v
| +---------------+ | +---------------+
| | ".sid" file | | | ".sid" file |
| | update based | | | update based |
| | on previous | | | on previous |
| | ".sid" file | | | ".sid" file |
| +-------+-------+ | +-------+-------+
| | | |
| v | v
| .-------------. +---------------+ | .-------------. +---------------+
| / Publicly \ yes | YANG module | | / Publicly \ yes | YANG module |
| \ available ? /---->| registration | | \ available? /---->| registration |
| '------+------' +-------+-------+ | '------+------' +-------+-------+
| | no | | | no |
+--------------+---------------------+ +--------------+---------------------+
| |
v v
[DONE] [DONE]
Figure 5: YANG and ".sid" file update Figure 5: YANG and ".sid" File Update
Appendix D. Keeping a SID File in a YANG Instance Data file Appendix D. Keeping a SID File in a YANG Instance Data File
[RFC9195] defines a format for "YANG Instance Data". This [RFC9195] defines a format for "YANG instance data". This
essentially leads to an encapsulation of the instance data within essentially leads to an encapsulation of the instance data within
some metadata envelope. some metadata envelope.
If a SID file needs to be stored in a YANG Instance Data file, this If a SID file needs to be stored in a YANG instance data file, this
can be achieved by embedding the value of the SID file as the value can be achieved by embedding the value of the SID file as the value
of the content-data member in the following template, and copying of the content-data member in the following template and copying over
over the second-level members as indicated with the angle brackets: the second-level members as indicated with the angle brackets:
{ {
"ietf-yang-instance-data:instance-data-set": { "ietf-yang-instance-data:instance-data-set": {
"name": "<module-name>@<module-revision>.sid", "name": "<module-name>@<module-revision>.sid",
"description": ["<description>"], "description": ["<description>"],
"content-schema": { "content-schema": {
"module": "ietf-sid-file@2023-10-27" "module": "ietf-sid-file@2023-10-27"
}, },
"content-data": { <replace this object> "content-data": { <replace this object>
"ietf-sid-file:sid-file" : { "ietf-sid-file:sid-file" : {
"module-name": ... "module-name": ...
} }
} }
} }
} }
// RFC editor: Please replace the module date by the correct one for
// the ietf-sid-file module.
Acknowledgments Acknowledgments
The authors would like to thank Andy Bierman, Abhinav Somaraju, Peter The authors would like to thank Andy Bierman, Abhinav Somaraju, Peter
van der Stok, Laurent Toutain and Randy Turner for their help during van der Stok, Laurent Toutain, and Randy Turner for their help during
the development of this document and their useful comments during the the development of this document and their useful comments during the
review process. Special thanks go to the IESG members who supplied review process. Special thanks go to the IESG members who supplied
very useful comments during the IESG processing phase, in particular very useful comments during the IESG processing phase, in particular
to Benjamin Kaduk and Rob Wilton, and to Francesca Palombini as to Benjamin Kaduk and Rob Wilton, and to Francesca Palombini as
responsible AD. responsible AD.
Contributors Contributors
Andy Bierman Andy Bierman
YumaWorks YumaWorks
skipping to change at page 50, line 4 skipping to change at line 2252
Andy Bierman Andy Bierman
YumaWorks YumaWorks
685 Cochran St. 685 Cochran St.
Suite #160 Suite #160
Simi Valley, CA 93065 Simi Valley, CA 93065
United States of America United States of America
Email: andy@yumaworks.com Email: andy@yumaworks.com
Authors' Addresses Authors' Addresses
Michel Veillette (editor) Michel Veillette (editor)
Trilliant Networks Inc. Trilliant Networks Inc.
610 Rue du Luxembourg 610 Rue du Luxembourg
Granby Quebec J2J 2V2 Granby Quebec J2J 2V2
Canada Canada
Phone: +14503750556 Phone: +1-450-375-0556
Email: michel.veillette@trilliant.com Email: michel.veillette@trilliant.com
Alexander Pelov (editor) Alexander Pelov (editor)
IMT Atlantique IMT Atlantique
2 rue de la Châtaigneraie 2 rue de la Châtaigneraie
35510 Cesson-Sevigne 35510 Cesson-Sévigné
France France
Email: alexander.pelov@imt-atlantique.fr Email: alexander.pelov@imt-atlantique.fr
Ivaylo Petrov (editor) Ivaylo Petrov (editor)
Google Switzerland GmbH Google Switzerland GmbH
Brandschenkestrasse 110 Brandschenkestrasse 110
CH-8002 Zurich CH-8002 Zurich
Switzerland Switzerland
Email: ivaylopetrov@google.com Email: ivaylopetrov@google.com
 End of changes. 289 change blocks. 
734 lines changed or deleted 696 lines changed or added

This html diff was produced by rfcdiff 1.48.